Key facts
- Brand
- STMicroelectronics
- Model
- L6506
- Category
- stepping motor
- Documents
- 2
- Languages
- EN
- Last added
- 2012-08-09
Start here

STMicroelectronics L6506/L6506D Current Controller Datasheet
The L6506 and L6506D are linear integrated circuits designed to sense and control current in stepping motors and similar devices. When used with drivers such as the L298, L298, L7150, or L6114/L6115, the chip set forms a constant current drive for an inductive load and performs all interface functions from control logic through the power stage. Two or more devices may be synchronized using the sync pin, allowing a master chip to set the operating frequency for all chips in the system.
The device features a common on-chip oscillator that drives a dual chopper to set the operating frequency for a pulse width modulated drive. It includes a comparator section for sensing input voltage and a logic section with TTL compatible inputs and outputs. The oscillator frequency is set by an external RC network on pin 1, and the peak current in each winding is programmed by selecting the value of the sense resistor and the reference voltage.
STMicroelectronics L6506 specifications
| Oscillator Frequency Range | 5 to 70 KHz |
|---|---|
| Junction Temperature | 150 °C |
| Storage Temperature | -40 to 150 °C |
Source: STMicroelectronics L6506/L6506D Current Controller Datasheet
All STMicroelectronics L6506 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What is the function of the L6506?
It is a linear integrated circuit designed to sense and control the current in stepping motors and similar devices.
From: STMicroelectronics L6506/L6506D Current Controller Datasheet
Can multiple L6506 devices be synchronized?
Yes, two or more devices may be synchronized using the sync pin, where the oscillator in the master chip sets the operating frequency in all chips.
From: STMicroelectronics L6506/L6506D Current Controller Datasheet
What motor configurations can the L6506 control?
The L6506 may be used with either two phase bipolar or four phase unipolar motor configurations.
From: STMicroelectronics AN469 L6506 Stepper Motor Current Control Application Note
What is the minimum value for resistor R1 in the oscillator circuit?
The minimum value for R1 of 700Q (1 KQ —30 %) should be used to guarantee the required pulse width.
From: STMicroelectronics AN469 L6506 Stepper Motor Current Control Application Note
