Key facts
- Brand
- STMicroelectronics
- Model
- STSR3
- Category
- Power Management
- Documents
- 3
- Languages
- EN
- Last added
- 2012-08-10
Start here

STMicroelectronics STSR30 Synchronous Rectifier Smart Driver Datasheet
The STSR30 is a Smart Driver IC designed to drive secondary power MOSFETs used as synchronous rectifiers in low output voltage, high efficiency flyback converters. It generates driving signals synchronized with a clock input from the secondary side of the isolation transformer, featuring set dead times relative to the primary side PWM signal to prevent shoot-through conditions.
The device includes a fast cycle-after-cycle logic control mechanism for anticipation in turn-off, an inhibit function to shut off the drive output during discontinuous mode, and a disable pin to reduce current consumption during no-load conditions. It operates with a supply voltage range of 4V to 5.5V and supports typical peak output currents of 1.5A.
STMicroelectronics STSR3 specifications
| Supply Voltage Range | 4V to 5.5V |
|---|---|
| Typical Peak Output Current | 1.5A |
| Operating Frequency | 20 to 500 KHz |
| Inhibit Blanking Time | 700 ns |
| Storage Temperature Range | -40 to +150 °C |
| Operating Junction Temperature Range | -40 to +125 °C |
| Thermal Resistance Junction-case | 40 °C/W |
| Thermal Resistance Junction-ambient | 160 °C/W |
Source: STMicroelectronics STSR30 Synchronous Rectifier Smart Driver Datasheet
All STMicroelectronics STSR3 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What is the supply voltage range for the STSR30?
The supply voltage range is from 4V to 5.5V.
From: STMicroelectronics STSR30 Synchronous Rectifier Smart Driver Datasheet
What is the typical peak output current?
The typical peak output current is 1.5A for both source and sink.
From: STMicroelectronics STSR30 Synchronous Rectifier Smart Driver Datasheet
What is the typical peak output current capability?
The typical peak output current is 2A for sourcing and 3.5A for sinking.
From: STMicroelectronics STSR3 Synchronous Rectifier Smart Driver Datasheet
What is the operating frequency range?
The device operates in a frequency range from 30 to 750 KHz.
From: STMicroelectronics STSR3 Synchronous Rectifier Smart Driver Datasheet
What is the function of the INHIBIT pin?
The INHIBIT pin acts as a Discontinuous Mode Detector that allows shut-off of the drive output by sensing the Synchronous Rectifier source-drain voltage.
How does the STSR3 synchronize its operation?
The STSR3 obtains synchronization directly from the secondary side using the voltage across the Synchronous mosfet as the information for the switching transitions.
