Key facts
- Brand
- STMicroelectronics
- Model
- STSR2P
- Category
- Power Management
- Documents
- 2
- Languages
- EN
- Last added
- 2012-08-10
Start here
ST STSR2P/ STSR2PM handbook
The IC provides two complementary high current outputs to drive Power Mosfets. The IC is dedicated to properly drive secondary Synchronous Rectifiers medium power, low output voltage, high efficiency in Forward Converters. From a synchronizing clock input, STSR2P generates two driving signals with the self-setting of dead time between complementary pulses. The IC operation prevents secondary side shoot-through conditions providing proper timing at the outputs turn-off transition. This smart function operates through a fast cycle-after-cycle control logic mechanism based on an internal high frequency oscillator, synchronized by the clock signal. A fixed anticipation in turning-off the OUTGATE1 with respect to the clock signal transition is provided, while the anticipation in turning off the OUTGATE2 can be set through external components. The adopted transitions revelation mechanism makes circuit operation independent by the forward magnetic reset technique used, avoiding most of the common problems inherent in self-driven synchronous rectifiers. A special Inhibit function allows the shut-off of OUTGATE2. This feature makes discontinuous conduction mode possible.
Read onlineSTMicroelectronics STSR2P specifications
| Supply Input Range | 4V to 5.5V |
|---|---|
| Maximum Supply Voltage | 5.7V |
| Maximum CK Pin Current | 10mA |
| Internal Comparator Threshold | -25mV |
| Inhibit Monitoring Time | 250ns |
| Minimum Voltage Difference for DCM | 400mV |
All STMicroelectronics STSR2P documents by type
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What is the supply voltage range for the STSR2P?
The supply input range is from 4V to 5.5V.
How does the INHIBIT pin enable discontinuous mode?
The INHIBIT pin turns off the freewheeling MOSFET when the current approaches zero, allowing the body diode to operate as a common rectifier.
