Key facts
- Brand
- Fairchild
- Model
- FAN6982
- Category
- Power Management
- Industry
- Electronics
- Documents
- 2
- Languages
- ZH · EN
- Last added
- 2026-11-16
Start here

Fairchild FAN6982 Power Factor Correction Controller AN-6982 Application Note
This Chinese application note (AN-6982, Rev. 1.0.1, dated 11/26/14) is a Fairchild document about designing a power factor correction converter with the FAN6982 controller. It introduces the FAN6982 as a 14-pin continuous conduction mode (CCM) PFC controller IC that uses leading-edge modulation for current sharing and lists features such as variable output voltage (range function), RDY signal, TriFault Detect, PFC soft start, peak current limit, line feedforward, and input brownout protection.
The note explains CCM and BCM operation, the current and voltage control loops, line feedforward, line voltage sensing, the range function, the oscillator, the RDY function, and soft-start operation. It includes a typical application circuit and design equations for key parameters. This manual is written in Chinese.
Fairchild FAN6982 specifications
| Device type | 14-pin continuous conduction mode (CCM) PFC controller IC |
|---|---|
| Control modulation | Leading-edge modulation for current sharing |
| Internal reference voltage | 2.5 V |
| Internal resistor RM | Typically 5.7 kΩ |
| PFC startup threshold | 1.9 V |
| Brownout protection trip point | 1.05 V |
| Range function current source | 20 µA |
| Soft-start VEA clamp | 2.8 V until PFC output reaches 96% of nominal |
Source: Fairchild FAN6982 Power Factor Correction Controller AN-6982 Application Note
All Fairchild FAN6982 documents by type
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What is the FAN6982?
It is a 14-pin continuous conduction mode (CCM) power factor correction (PFC) controller IC.
From: Fairchild FAN6982 Power Factor Correction Controller AN-6982 Application Note
What does the range function do?
It lowers the PFC output voltage under light-load and low-line conditions.
From: Fairchild FAN6982 Power Factor Correction Controller AN-6982 Application Note
What is the typical application for the FAN6982?
The FAN6982 is commonly used for high-power applications above 300W.
From: Fairchild Semiconductor FAN6982 Power Factor Correction Converter Design Application Note
How does the FAN6982 control the downstream DC/DC converter?
The RDY signal is used for power-on sequence control of the downstream DC/DC converter.
From: Fairchild Semiconductor FAN6982 Power Factor Correction Converter Design Application Note
