Key facts
- Brand
- Analog Devices
- Model
- AD9353
- Industry
- Industrial
- Documents
- 3
- Languages
- EN
- Last added
- 2012-05-03
Start here
Analog Devices AD9353 Datasheet
The AD9353 is a fully integrated RF transceiver for IEEE 802.16 WiMAX systems. It combines the RF front‑end with mixed‑signal baseband, providing a digital interface to a baseband ASIC or FPGA. The device operates from 3.3 GHz to 3.8 GHz and supports channel bandwidths from 3.5 MHz up to 20 MHz. Features include a 12‑bit ADC, 10‑bit DAC, autonomous AGC, Tx power control, and an internal fractional‑N synthesizer with 8 Hz LO steps.
The transceiver is powered from a single 3.3 V supply and includes on‑chip LDOs, eliminating external regulators. It is packaged in a 9 mm × 9 mm, 64‑lead LFCSP. An internal auxiliary ADC and two DACs are available for system monitoring, and three general‑purpose I/Os can be programmed via a 4‑wire serial port.
Analog Devices AD9353 specifications
| Frequency range | 3.3 GHz to 3.8 GHz |
|---|---|
| Bandwidth range | 3.5 MHz to 20 MHz |
| Receiver noise figure | 3.2 dB |
| Tx EVM | -36 dB |
| Signal‑to‑noise ratio | > 134 dB/Hz |
| Tx power control range | 0 dB to 58 dB |
| Tx power control resolution | 0.25 dB steps |
| Frequency correction accuracy | < 0.012 ppm |
| LO step size | 8 Hz |
| Phase noise | < 0.8° rms |
| ADC resolution | 12‑bit |
| DAC resolution | 10‑bit |
| Supply voltage | 3.3 V |
| Package | 9 mm × 9 mm, 64‑lead LFCSP |
Source: Analog Devices AD9353 Datasheet
All Analog Devices AD9353 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What frequency range does the AD9353 cover?
The AD9353 operates from 3.3 GHz to 3.8 GHz.
What is the receiver noise figure of the AD9353?
The receiver noise figure is 3.2 dB.
What frequency range does the AD9353 support?
It operates from 3.3 GHz to 3.8 GHz.
From: Analog Devices AD9353 WiMAX RF MxFE Transceiver Datasheet
What is the noise figure of the AD9353 receiver?
The receiver has a noise figure of 3.2 dB.
From: Analog Devices AD9353 WiMAX RF MxFE Transceiver Datasheet
What frequency range does the AD9353 cover?
The AD9353 operates from 3.3 GHz to 3.8 GHz.
From: Analog Devices AD9353 WiMAX RF MxFE Transceiver Handbook
What is the receiver noise figure of the AD9353?
The receiver has a noise figure of 3.2 dB.
From: Analog Devices AD9353 WiMAX RF MxFE Transceiver Handbook