Analog Devices AD831 Manuals

ManualLib has 33 documents for the Analog Devices AD831 (Other Electronics): 33 datasheets. Every file can be read online or downloaded as a PDF for free.

Datasheet 33

Key facts

Model
AD831
Documents
33
Languages
EN
Last added
2012-08-03

Start here

ANALOG DEVICES AD8318-EP: 1 MHz to 8 GHz 70 dB Logarithmic Detector/Controller Data Sheet (Rev 0 2012-07-25-)

ANALOG DEVICES AD8318-EP: 1 MHz to 8 GHz 70 dB Logarithmic Detector/Controller Data Sheet (Rev 0 2012-07-25-)

Datasheet 12 pages · 429 KB · EN

The AD8318-EP is a demodulating logarithmic amplifier capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage. It employs progressive compression over a cascaded amplifier chain and operates with a single 5 V supply, consuming typically 68 mA.

Read online

Analog Devices AD831 specifications

Specified Frequency Range1 MHz to 8 GHz
+3 dB Dynamic Range (25°C)65 dB
Supply Voltage4.5 V to 5.5 V
Quiescent Current (Enabled)68 mA
Operating Temperature Range-55°C to +105°C

Source: ANALOG DEVICES AD8318-EP: 1 MHz to 8 GHz 70 dB Logarithmic Detector/Controller Data Sheet (Rev 0 2012-07-25-)

All Analog Devices AD831 documents by type

Datasheet 33

Ratings, dimensions and ordering codes, for selection and design work.

Questions answered in these manuals

What is the typical current consumption of the AD8318-EP?

The device typically consumes 68 mA when enabled with a 5 V supply.

From: ANALOG DEVICES AD8318-EP: 1 MHz to 8 GHz 70 dB Logarithmic Detector/Controller Data Sheet (Rev 0 2012-07-25-)

How does the power-down feature affect current usage?

Power consumption decreases to less than 1.5 mW when the device is disabled.

From: ANALOG DEVICES AD8318-EP: 1 MHz to 8 GHz 70 dB Logarithmic Detector/Controller Data Sheet (Rev 0 2012-07-25-)

What is the typical response time for a 10 dB step?

The response time is about 70 ns for a 10 dB step.

From: Analog Devices AD8314 Logarithmic Amplifier Datasheet

What LO drive level is required for optimal performance?

The AD831 requires a low LO drive of –10 dBm to achieve its specified performance.

From: Analog Devices AD831 Mixer Datasheet

Can the AD831 operate from a single power supply?

Yes, it can operate from a single supply of at least 9 V.

From: Analog Devices AD831 Mixer Datasheet

What supply voltage does the AD8313 require?

The AD8313 operates from a single supply voltage between 2.7 V and 5.5 V.

From: Analog Devices AD8313 Datasheet