Key facts
- Brand
- Ricoh
- Model
- PJ WX2240
- Category
- Projector
- Industry
- Appliances
- Documents
- 2
- Languages
- ZH
- Last added
- 2026-10-07
Start here
Ricoh PJ WX2240/WX5460 Projector User Manual
This document is the user manual for the Ricoh PJ WX2240 and PJ WX5460 series of projectors. It covers essential safety precautions before use, basic operation steps, and how to configure user settings on the device.
The guide also details LAN control features for network management, provides a troubleshooting section for common issues, and includes specific instructions for replacing the projector lamp bulb safely. This manual is written in Chinese.
Ricoh PJ WX2240 specifications
| DLP chip | 0.55" SVGA |
|---|---|
| Resolution | SVGA / XGA / WXGA |
| Lamp type | 190W |
| Projection distance | 1.2–12 m (X2240) / 1–10 m (WX2240) |
| Throw ratio | 1.95–2.15 (X2240) / 1.55–1.7 (WX2240) |
| Dimensions (without stand) | 314.2 mm W × 223.5 mm D × 88.2 mm H |
| Weight | < 2.6 kg |
| Lamp life (standard mode) | 4500 hours |
| Noise level (full screen) | 3–4 dB(A) |
| Power consumption (eco mode) | Typical 204 W, Max 224 W @ 110 V |
| Operating temperature | 41 °F to 104 °F (5 °C to 40 °C) |
| Storage temperature | -4 °F to 140 °F (-20 °C to 60 °C) |
All Ricoh PJ WX2240 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I replace the lamp in the Ricoh PJ X2240 / PJ WX2240?
Turn off the projector, unplug the power cord, wait at least 60 minutes for the lamp to cool, then follow the lamp‑replacement steps shown in the manual.
What input connections are available on the projector?
The projector provides S‑Video In, HDMI In, two computer video inputs, audio inputs and outputs, a PC control (9‑pin) port, a service port, and an AC power inlet.
How long must the projector be unplugged before changing the lamp?
You must unplug the projector and wait at least 60 minutes before replacing the bulb.
What type of screws are required to mount the projector on a stand?
The projector uses three M4-16 screws for mounting.