Key facts
- Brand
- Analog Devices
- Model
- AD5340
- Industry
- Industrial
- Documents
- 2
- Languages
- EN
- Last added
- 2012-05-09
Start here
Analog Devices AD5330/AD5331/AD5340/AD5341 DAC Datasheet
The AD5330, AD5331, AD5340 and AD5341 are single‑channel 8‑, 10‑ and 12‑bit digital‑to‑analog converters offered in thin‑shrink TSSOP packages. They operate from a 2.5 V to 5.5 V supply, consume low power (115 µA @ 3 V, 140 µA @ 5 V) and provide a parallel interface with double‑buffered input logic for simultaneous updates via the LDAC pin.
Key features include selectable output ranges (0 V‑VREF or 0 V‑2×VREF), power‑down current as low as 80 nA, rail‑to‑rail output buffers, guaranteed monotonicity, and an operating temperature range of –40 °C to +105 °C. The document details pin configurations, timing diagrams, absolute maximum ratings and typical application circuits.
Analog Devices AD5340 specifications
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
|---|---|
| Power Consumption (Normal Mode) | 115 µA @ 3 V, 140 µA @ 5 V |
| Power‑Down Current | 80 nA @ 3 V, 200 nA @ 5 V |
| Output Range | 0 V to VREF or 0 V to 2 × VREF |
| Operating Temperature Range | –40 °C to +105 °C |
| DC Output Impedance | 0.5 Ω |
| Short‑Circuit Current (VDD=5 V) | 25 mA |
Source: Analog Devices AD5330/AD5331/AD5340/AD5341 DAC Datasheet
All Analog Devices AD5340 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What supply voltage range do the AD5330/AD5331/AD5340/AD5341 support?
They operate from 2.5 V to 5.5 V.
From: Analog Devices AD5330/AD5331/AD5340/AD5341 DAC Datasheet
How much current does the device draw in power‑down mode?
The power‑down current is 80 nA at 3 V and 200 nA at 5 V.
From: Analog Devices AD5330/AD5331/AD5340/AD5341 DAC Datasheet
What supply voltage range does the AD5330/AD5331/AD5340/AD5341 support?
The devices operate from a supply voltage of 2.5 V to 5.5 V.
How can multiple DACs be updated at the same time?
All DACs can be updated simultaneously by using a common LDAC pin.