Key facts
- Brand
- Maxim
- Model
- MAX452
- Category
- Other Electronics
- Documents
- 7
- Languages
- EN
- Last added
- 2012-05-07
Start here
MAXIM MAX4526/MAX4527 Manual
MAX4526/MAX4527 are CMOS analog ICs configured as phase-reversal switches. The MAX4526 is optimized for high-speed applications, such as chopper amplifiers, while the MAX4527 is optimized for low-power applications. The MAX4526/MAX4527 operate from a +4.5V to +36V single supply or ±4.5V to ±18V dual supplies. On-resistance (175Ω max) is matched between switches to 8Ω maximum. Each switch can handle rail-to-rail analog signals. Maximum leakage current is only 0.5nA at +25°C and 10nA at +85°C. All digital inputs have 0.8V to 2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility.
Read onlineMaxim MAX452 specifications
| On‑Resistance (R_ON) max | 160 Ω |
|---|---|
| Off‑Leakage Current (typical) | 0.5 nA at 25 °C |
| Supply Voltage Range (dual) | ±4.5 V to ±20 V |
| Supply Voltage Range (single) | +9 V to +36 V |
| Output Current in Fault | 13 mA |
| Package Options | 6‑pin SOT‑23, 8‑pin µMAX |
Source: Maxim Integrated MAX4510/MAX4520 Analog Switch Datasheet
All Maxim MAX452 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What is the off‑leakage current at 25 °C?
The off‑leakage current is 0.5 nA at 25 °C.
From: Maxim Integrated MAX4510/MAX4520 Analog Switch Datasheet
Which supply voltage ranges are supported?
Dual supplies from ±4.5 V to ±20 V or a single supply from +9 V to +36 V.
From: Maxim Integrated MAX4510/MAX4520 Analog Switch Datasheet
What is the off‑leakage current at 25 °C?
The off‑leakage current is typically 2 nA at 25 °C.
What supply voltage range does the MAX4529 support?
It operates from dual ±2.7 V to ±6 V supplies or from a single +2.7 V to +12 V supply.
From: Maxim MAX4529 Low-Voltage Bidirectional RF/Video Switch Datasheet
What is the off‑isolation performance at 10 MHz?
The device provides –80 dB off isolation at 10 MHz.
From: Maxim MAX4529 Low-Voltage Bidirectional RF/Video Switch Datasheet
What supply voltage do the MAX452 series devices use?
All MAX452 family devices operate from a +5 V supply.
From: Maxim MAX452/3/4/5 CMOS Video Multiplexer/Amplifier Datasheet