Key facts
- Manuals
- 2,224
- Models
- 651
- Categories
- 2
- Last added
- 2012-12-06
Maxim models by category
Latest Maxim manuals
MAXIM DS4302 digital output datasheet
DS4302 is a 5-bit digital-to-analog converter with three programmable digital outputs. DS4302 communicates through a 2-wire, SMBus™-compatible, serial interface. The tiny 8-pin µSOP package is ideal for use in space-constrained applications.
MAXIM MAX4172 Current-Sense Amplifier DATASHEET
MAXIM MAX6765 MAX6774 regulators datasheet
MAX6765-MAX6774 series automotive micropower linear regulators with supervisor
MAXIM MAX1587A evaluation kit datasheet
The MAX1587A is a high-performance synchronous step-down DC-DC power-management IC optimized for microprocessor-based applications. The IC integrates three high-performance synchronous step-down DC-DC power supplies, two low-dropout (LDO) regulators, a battery backup supply, and various power-management functions.
MAXIM DS9106 iButtonTM Halo datasheet
This document describes the features and characteristics of DS9106 iButton Halos. It slides over an iButton and highlights it with a colored tab for quick sighting. The product is available in six bright colors and has a usable tail length of 20mm or 60mm for legends. The tail is secured using DS9096P adhesive pads. Each bag contains 1000 labels.
MAXIM DS9093A DS9093F DS9093N iButton(TM) Key Ring Mounts datasheet
DS9093A and DS9093F are low-cost key ring mounts for iButton thumbpad applications. They offer different colors and models of key ring mounts.
MAXIM MAX1799 evaluation kit datasheet
MAX1799 is an integrated circuit containing 5 programmable LDO linear regulators and 2 dedicated open-drain outputs. Each regulator can be individually adjusted from +1.8V to +3.3V. Two open-drain outputs can sink up to 150mA.
MAXIM MAX2990 Power Line Communication Modem datasheet
The MAX2990 is a 10kHz to 490kHz OFDM-based power line communication modem. It provides a cost-effective, reliable, half-duplex asynchronous data communication over AC power lines at speeds up to 100kbps.
MAXIM MAX1077/MAX1079 handbook(1)
The MAX1077/MAX1079 are low-power, high-speed, serial-output, 10-bit, analog-to-digital converters (ADCs) that operate at up to 1.5Msps and have an internal reference. These devices feature true-differential inputs, offering better noise immunity, distortion improvements, and a wider dynamic range over single-ended inputs. A standard SPI™/QSPI™/MICROWIRE™ interface provides the clock necessary for conversion. These devices easily interface with standard digital signal processor (DSP) synchronous serial interfaces. The MAX1077/MAX1079 operate from a single +2.7V to +3.6V supply voltage. The MAX1077/MAX1079 include a 2.048V internal reference. The MAX1077 has a unipolar analog input, while the MAX1079 has a bipolar analog input. These devices feature a partial power-down mode and a full power-down mode for use between conversions, which lower the supply current to 2mA (typ) and 1µA (max), respectively. Also featured is a separate power-supply input (VL), which allows direct interfacing to +1.8V to VDD digital logic. The fast conversion speed, low-power dissipation, excellent AC performance, and DC accuracy (±0.5 LSB INL) make the MAX1077/MAX1079 ideal for industrial process control, motor control, and base-station applications. The MAX1077/MAX1079 come in a 12-pin TQFN package, and are available in the commercial (0°C to +70°C) and extended (-40°C to +85°C) temperature ranges.
MAXIM MAX1077/MAX1079 datasheet(1)
The MAX1077/MAX1079 are low-power, high-speed, serial-output, 10-bit, analog-to-digital converters (ADCs) that operate at up to 1.5Msps and have an internal reference. These devices feature true-differential inputs, offering better noise immunity, distortion improvements, and a wider dynamic range over single-ended inputs. A standard SPI™/QSPI™/MICROWIRE™ interface provides the clock necessary for conversion. These devices easily interface with standard digital signal processor (DSP) synchronous serial interfaces. The MAX1077/MAX1079 operate from a single +2.7V to +3.6V supply voltage. The MAX1077/MAX1079 include a 2.048V internal reference. The MAX1077 has a unipolar analog input, while the MAX1079 has a bipolar analog input. These devices feature a partial power-down mode and a full power-down mode for use between conversions, which lower the supply current to 2mA (typ) and 1µA (max), respectively. Also featured is a separate power-supply input (VL), which allows direct interfacing to +1.8V to VDD digital logic. The fast conversion speed, low-power dissipation, excellent AC performance, and DC accuracy (±0.5 LSB INL) make the MAX1077/MAX1079 ideal for industrial process control, motor control, and base-station applications. The MAX1077/MAX1079 come in a 12-pin TQFN package, and are available in the commercial (0°C to +70°C) and extended (-40°C to +85°C) temperature ranges.
MAXIM MAX1076/MAX1078 datasheet
MAXIM MAX1072/MAX1075 handbook
MAX1072/MAX1075 low-power, high-speed, serial-output, 10-bit, analog-to-digital converters (ADCs) operate at up to 1.8Msps.
MAXIM MAX1070/MAX1071 handbook
The MAX1070/MAX1071 are low-power, high-speed, serial-output, 10-bit analog-to-digital converters (ADCs) that operate at up to 1.5Msps. These devices feature true-differential inputs, offering better noise immunity, distortion improvements, and a wider dynamic range over single-ended inputs. A standard SPI™/QSPI™/MICROWIRE™ interface provides the clock necessary for conversion. These devices easily interface with standard digital signal processor (DSP) synchronous serial interfaces. The MAX1070/MAX1071 operate from a single +2.7V to +3.6V supply voltage and require an external reference. The MAX1070 has a unipolar analog input, while the MAX1071 has a bipolar analog input. These devices feature a partial power-down mode and a full power-down mode for use between conversions, which lower the supply current to 1mA (typ) and 1µA (max), respectively. Also featured is a separate power-supply input (VL), which allows direct interfacing to +1.8V to VDD digital logic. The fast conversion speed, low-power dissipation, excellent AC performance, and DC accuracy (±0.5 LSB INL) make the MAX1070/MAX1071 ideal for industrial process control, motor control, and base-station applications. The MAX1070/MAX1071 come in a 12-pin TQFN package, and are available in the commercial (0°C to +70°C) and extended (-40°C to +85°C) temperature ranges.
MAXIM MAX107 handbook
The MAX107 is a dual, 6-bit, analog-to-digital converter (ADC) designed to allow fast and precise digitizing of in-phase (I) and quadrature (Q) baseband signals. The MAX107 converts the analog signals of both I and Q components to digital outputs at 400Msps while achieving a signal-to-noise ratio (SNR) of typically 37dB with an input frequency of 125MHz, and an integral nonlinearity (INL) and differential nonlinearity (DNL) of ±0.25 LSB. The MAX107 analog input preamplifiers feature a 400MHz, -0.5dB, and a 1.5GHz, -3dB analog input bandwidth. Matching channel-to-channel performance is typically 0.04dB gain, 0.1LSB offset, and 0.2 degrees phase. Dynamic performance is 36.7dB signal-to-noise plus distortion (SINAD) with a 125MHz analog input signal and a sampling speed of 400MHz. A fully differential comparator design and encoding circuits reduce out-of-sequence errors, and ensure excellent metastable performance of only one error per 1016 clock cycles. In addition, the MAX107 provides LVDS digital outputs with an internal 6:12 demultiplexer that reduces the output data rate to one-half the sample clock rate. Data is output in two’s complement format. The MAX107 operates from a +5V analog supply and the LVDS output ports operate at +3.3V. The data converter’s typical power dissipation is 2.6W. The device is packaged in an 80-pin, TQFP package with exposed paddle, and is specified for the extended (-40°C to +85°C) temperature range.
MAXIM MAX1069 handbook
The MAX1069 is a low-power, 14-bit successive- approximation analog-to-digital converter (ADC).