Key facts
- Brand
- Philips
- Model
- MCD700
- Documents
- 6
- Languages
- ES · EN · ZH
- Last added
- 2012-03-06
Start here
Philips MCD700 MCL707 Quick Start Guide
The guide lists the items included in the box and shows how to connect speakers, antennas, control cable, video cable and power cord. It explains speaker wiring (right to R, left to L, red to +, silver to –) and antenna connections for FM and MW.
It then walks through turning on the player, setting the TV input, selecting the disc source, loading a disc, and using the remote to play DVDs, CDs, MP3‑CDs and other supported media types. This manual is written in Chinese.
Philips MCD700 specifications
| Input voltage | 110–127 / 220–240 V; ~50/60 Hz |
|---|---|
| Power consumption | 32 W |
| Amplifier output power | 22 W × 2 (8 Ω, 1 kHz) |
| Speaker impedance | 8 Ω |
| Audio frequency response | 80 Hz – 16 kHz |
| Audio S/N ratio | ≥ 60 dB |
| Dimensions (W × H × D) | 208 mm × 61.7 mm × 244 mm |
| Weight | 1.4 kg |
All Philips MCD700 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
The shortest path to a working setup, usually only a few pages.
Questions answered in these manuals
What ventilation clearance is required around the unit?
Leave at least 10 cm (4 inches) of space behind, above, and on each side of the unit for proper ventilation.
How do I change the voltage selector for 110 V operation?
The voltage selector is preset to 220 V; set it to 110 V‑127 V before turning the power on if your region uses that voltage.
How do I set the voltage selector for 110 V operation?
Adjust the voltage selector located at the bottom of the system from the factory preset of 220‑240 V to 110‑127 V before turning the unit on.
What speaker impedance should I use with this system?
Connect speakers with an impedance of 8 Ω; using lower‑impedance speakers may damage the system.
How do I connect the speakers?
Use two speaker wires: connect the right speaker to the "R" terminal and the left speaker to the "L" terminal, with the red wire to "+" and the silver wire to "-".
Do I need to connect the FM antenna?
No, the FM antenna is already installed on the unit, so no additional connection is required.