Key facts
- Brand
- Philips
- Model
- DC220
- Documents
- 5
- Languages
- ZH
- Last added
- 2011-12-25
Start here
Philips DC220 iPhone/iPod Clock Radio Quick Start Guide
This Quick Start Guide explains how to unpack and connect the Philips DC220 iPhone/iPod clock radio. It shows the items included in the box, how to attach the AC power adapter to the DC IN socket, and how to connect an iPhone or iPod.
The guide also details setting the time and date, configuring up to two alarms, selecting alarm sound sources, and using the playback controls for music from the iPhone/iPod or FM tuner. Instructions for pausing, skipping tracks, and adjusting alarm repeat intervals are provided. This manual is written in Chinese.
Philips DC220 specifications
| Rated Output Power | 2 x 2.5 W RMS |
|---|---|
| Frequency Response | 125 Hz – 16 kHz, ±3 dB |
| Signal‑to‑Noise Ratio | >55 dB |
| FM Tuning Range | 87.5 – 108 MHz |
| Dimensions (W × H × D) | 216.9 × 105 × 139.4 mm |
| Weight | 0.75 kg |
All Philips DC220 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
The shortest path to a working setup, usually only a few pages.
Questions answered in these manuals
How can I adjust the volume?
Press the VOL +/- buttons while playback is active to increase or decrease the sound level.
What should I do if the unit has no sound?
Check that the volume is turned up, ensure the power adapter is correctly connected, and verify the source selection (SOURCE button). If still silent, disconnect and reconnect the power plug and restart the unit.
How many alarms can I set?
You can set up to two alarms, each with independent time, source and volume settings.
From: Philips DC220 iPhone/iPod Clock Radio Quick Start Guide
How do I activate or deactivate an alarm?
Press and hold the AL 1 or AL 2 button; the alarm icon will appear when active and disappear when deactivated.
From: Philips DC220 iPhone/iPod Clock Radio Quick Start Guide