Key facts
Start here

Linksys PAP2/RT31P2 Phone Adapter Administration Guide
The guide provides an overview of the Linksys Phone Adapter, a low‑density VoIP gateway that converts analog telephone signals to IP telephony. It includes hardware details such as up to two RJ‑11 ports for standard phones and an RJ‑45 Ethernet interface for network connection.
It also describes the software configuration mechanisms, SIP‑based signaling, supported codecs, NAT traversal, and a full set of feature descriptions, troubleshooting steps, and reference tables for administrators.
Linksys PAP2 specifications
| Model | PAP2 |
|---|---|
| Standards | SIP v2 Session Initiation Protocol (RFC 3261, 3262, 3263, 3264) |
| Voice Codecs | G.729 A+B, G.711 a-law, G.711µ-law, G.726 |
| Ports | Power, Ethernet, Phone 1, Phone 2 |
| Cabling Type | CAT 5 (RJ45) for Ethernet Port and RJ11 for Phone Ports |
| Maximum Ringer Load | 5 REN |
| Ring Frequency | 10-40 Hz |
| Ring Voltage | 60-90 Vrms Configurable |
| Dimensions | 3.98" x 3.98" x 0.59" (W x H x D) (101 mm x 101 mm x 15 mm) |
| Power | 5 V DC, 2.0 A |
| Certifications | FCC, cUL, CE |
Source: Linksys PAP2 Phone Adapter for VoIP Installation and Troubleshooting Guide
All Linksys PAP2 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the Linksys PAP2 used for?
It allows you to make phone or fax calls using your broadband connection.
From: Linksys PAP2 Phone Adapter for VoIP Installation and Troubleshooting Guide
How many phone lines can the PAP2 support?
The adapter supports up to two phone lines, with separate service and phone numbers for each telephone jack.
From: Linksys PAP2 Phone Adapter for VoIP Installation and Troubleshooting Guide
How many telephone ports does the Linksys Phone Adapter provide?
The adapter provides up to two RJ‑11 ports for standard analog phones.
From: Linksys PAP2/RT31P2 Phone Adapter Administration Guide
Which codecs are supported by the Linksys Phone Adapter?
It supports G.711 (A‑law and µ‑law), G.726, G.729A, and G.723.1.
From: Linksys PAP2/RT31P2 Phone Adapter Administration Guide
How do I activate my Vonage service for the Linksys PAP2?
Visit www.vonage.com/activate, complete the activation, wait about 30 minutes, and then continue with the setup steps in the guide.
How do I activate my Vonage service for the PAP2?
Visit www.vonage.com/activate, wait about 30 minutes after activation, then follow the installation steps in the guide.
