Key facts
- Brand
- TP-Link
- Model
- TL-XAP3007GC-PoE
- Category
- Other network devices
- Documents
- 4
- Languages
- ZH
- Last added
- 2026-10-03
Start here
TP-LINK TL-XAP3007GC-PoE/DC Wireless Access Point User Manual
This Chinese user manual from TP-LINK explains how to configure the dual-band WiFi 6 wireless access point, using the TL-XAP3007GC-PoE/DC model as the configuration example. It is addressed to technicians who are familiar with network basics and terminology. The AP supports two working modes, FAT AP and FIT AP; in FAT mode the web management interface can be reached at tplogin.cn.
The manual covers logging in to the web interface, connecting the AP to the TP-LINK commercial cloud platform, basic network setup with DHCP or a static IP, working modes and 易展 mesh networking, wireless service and advanced wireless settings, VLAN settings, and system functions such as cloud management, device management, management accounts, system logs, time settings, configuration management, software upgrades and the Ping watchdog. This manual is written in Chinese.
TP-LINK TL-XAP3007GC-PoE specifications
| Power Supply | Supports IEEE 802.3af/at PoE and 12 V DC input |
|---|---|
| DC Power Adapter | 12 V DC, 2.0 A |
| Ethernet Port | 1 × WAN/LAN (PoE) RJ45 |
| Mode Switch | FAT/FIT mode selector |
| Reset Button | Factory reset when held until indicator flashes |
Source: TP-LINK TL-XAP3007GC-PoE/DC Wireless Ceiling AP Installation Guide
All TP-LINK TL-XAP3007GC-PoE documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I reset the AP to factory settings?
Press and hold the RESET button while the AP is powered on until the system indicator flashes, then release the button; the AP will restart with factory defaults.
From: TP-LINK TL-XAP3007GC-PoE/DC Wireless Ceiling AP Installation Guide
What power options are available for this AP?
The AP can be powered via IEEE 802.3af/at PoE or with an external 12 V DC 2.0 A adapter.
From: TP-LINK TL-XAP3007GC-PoE/DC Wireless Ceiling AP Installation Guide
How do I reset the access point to factory defaults?
Press and hold the RESET button while the AP is powered on until the system indicator flashes, then release; the AP will reboot with factory settings.
From: TP-LINK TL-XAP3007GC-PoE/DC Wireless Ceiling AP Installation Guide
What power options are available for the TL‑XAP3007GC‑PoE/DC?
The device can be powered via IEEE 802.3af/at PoE or by a 12 V DC 2.0 A external adapter.
From: TP-LINK TL-XAP3007GC-PoE/DC Wireless Ceiling AP Installation Guide
How do I reset the AP to factory settings?
While the AP is powered, press and hold the RESET key until the system indicator flashes, then release; the device will restore factory defaults and reboot.
From: TP-LINK TL-XAP3007GC-PoE/DC Wireless Ceiling AP Installation Guide
How do I log in to the AP's web management interface?
In FAT mode, connect a phone to the AP's default wireless signal or connect the AP to a computer with an Ethernet cable, then enter tplogin.cn in a browser. The default management address is tplogin.cn.
From: TP-LINK TL-XAP3007GC-PoE/DC Wireless Access Point User Manual