TP-LINK TL-XAP3007GC-PoE/DC Wireless Access Point User Manual

This document introduces the Web management interface and configuration methods of the TL-XAP3007GC-PoE/DC easy edition machine, including login, cloud connection, basic networking, work mode, wireless, etc.


TP-LINK TL-XAP3007GC-PoE/DC Wireless Access Point User Manual - cover page
Brand
TP-Link
Category
Other network devices
Document type
User Manual
Language
Chinese
Pages
52
File format
PDF
File size
7.8 MB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
BF2DA3CE809459F66EE3EB5BAD50E67B

About this manual

This Chinese user manual from TP-LINK explains how to configure the dual-band WiFi 6 wireless access point, using the TL-XAP3007GC-PoE/DC model as the configuration example. It is addressed to technicians who are familiar with network basics and terminology. The AP supports two working modes, FAT AP and FIT AP; in FAT mode the web management interface can be reached at tplogin.cn.

The manual covers logging in to the web interface, connecting the AP to the TP-LINK commercial cloud platform, basic network setup with DHCP or a static IP, working modes and 易展 mesh networking, wireless service and advanced wireless settings, VLAN settings, and system functions such as cloud management, device management, management accounts, system logs, time settings, configuration management, software upgrades and the Ping watchdog. This manual is written in Chinese.

What's inside

  • Web Management Interface Login
  • Cloud Connection in FAT Mode
  • Basic Network Settings
  • Working Modes
  • 易展 Mesh Networking
  • Wireless Service
  • Advanced Wireless Settings
  • VLAN Settings
  • Cloud Management
  • Ping Watchdog

Specifications

Wireless standardDual-band WiFi 6
Working modesFAT AP mode and FIT AP mode
Default management addresstplogin.cn
Default wireless network namesTP-LINK_XXXX and TP-LINK_5G_XXXX
Default subnet mask255.255.255.0

Frequently asked questions

How do I log in to the AP's web management interface?

In FAT mode, connect a phone to the AP's default wireless signal or connect the AP to a computer with an Ethernet cable, then enter tplogin.cn in a browser. The default management address is tplogin.cn.

What are the default wireless network names?

The AP's default signals are TP-LINK_XXXX and TP-LINK_5G_XXXX, where XXXX is the last four digits of the device's MAC address.

Which working modes does the AP support?

The AP supports FAT AP mode and FIT AP mode.

What does the Ping watchdog do?

The AP sends Ping packets to a set IP address at a set interval; if it receives no reply after the maximum number of lost packets, it restarts automatically.

Download PDF (7.8 MB)

More TP-Link Manuals


View all TP-Link manuals →