Dell W-6000 Fan Tray (HW-FT) Manuals

ManualLib has 2 documents for the Dell W-6000 Fan Tray (HW-FT) (Network Switches): 2 installation guides. Every file can be read online or downloaded as a PDF for free.

Installation Guide 2

Key facts

Brand
DELL
Model
W-6000 Fan Tray (HW-FT)
Documents
2
Languages
ZH · EN
Last added
2026-11-11

Start here

Dell PowerConnect W-6000 Fan Tray (HW-FT) Installation Guide

Dell PowerConnect W-6000 Fan Tray (HW-FT) Installation Guide

Installation Guide 6 pages · 433 KB · ZH

This document is the installation guide for the fan tray (HW-FT) of the Dell PowerConnect W-6000 controller chassis. The fan tray provides cooling for the W-6000M3 module and is required for normal operation; the W-6000 chassis operating temperature range is 0 to 40 °C (32 to 104 °F), and the software raises warnings when temperature thresholds are exceeded. The guide describes the tray's general and physical features, including built-in redundancy (three independent fans), hot-swapping, the tray slot location, and the status LED indications.

It then gives step-by-step instructions for replacing the fan tray: preparing the new tray, loosening the captive screws, separating and removing the old tray, inserting and seating the new one, and securing it. Because the W-6000 has no shutdown function, a hot-swap replacement must be completed within one minute; if two or more fans fail (amber/red LED), the chassis must be shut down and cooled before restart. The document closes with safety and regulatory notices (FCC Part 15, Canadian ICES-003), Dell support links, and copyright/legal statements noting the product is sourced from Aruba Networks. This manual is written in Chinese.

Read online

Dell W-6000 Fan Tray (HW-FT) specifications

Chassis operating temperature0 to 40 °C (32 to 104 °F)
Minor temperature alarm40 °C
Major temperature alarm50 °C
Critical temperature alarm60 °C
Fans per tray3 independent fans
Hot-swap time limit1 minute
Fan tray slot locationLeft side of the W-6000 chassis, extending from front to back

Source: Dell PowerConnect W-6000 Fan Tray (HW-FT) Installation Guide

All Dell W-6000 Fan Tray (HW-FT) documents by type

Installation Guide 2

Mounting, wiring and first power-up. Read it before the hardware goes in.

Questions answered in these manuals

What does the fan tray status LED mean when it is amber?

An amber LED means one fan has failed, but the remaining two fans can still provide adequate cooling until the fan tray is replaced.

From: Dell PowerConnect W-6000 Fan Tray (HW-FT) Installation Guide

What should I do if two or more fans in the tray fail?

Shut down the W-6000, replace the fan tray, let the chassis cool for at least five minutes, then power it back on.

From: Dell PowerConnect W-6000 Fan Tray (HW-FT) Installation Guide

How many fans does the W-6000 Fan Tray contain?

Three fans are provided in the fan tray, with any two providing enough airflow for proper cooling.

From: Dell PowerConnect W-6000 Fan Tray Installation Guide

How long do you have to complete a fan tray hot-swap?

The replacement procedure must be completed within one minute to resume proper cooling.

From: Dell PowerConnect W-6000 Fan Tray Installation Guide