Key facts
- Brand
- DELL
- Model
- W-AP110
- Category
- Wireless connection
- Documents
- 4
- Languages
- ZH · EN
- Last added
- 2023-11-25
Start here

Dell Networking W-AP110 Series Access Point Installation Guide
The Dell Networking W-AP110 is a wireless access point that supports IEEE 802.11a/b/g/n on 2.4 GHz and 5 GHz bands with MIMO technology. It provides status LEDs for power, Ethernet, 5 GHz, and 2.4 GHz, and can be powered using IEEE 802.3at or 802.3af Power over Ethernet.
This installation guide describes how to mount the access point, connect antennas and the RJ-45 Ethernet cable, and verify operation using the LEDs. It also references the Dell Networking W-Series ArubaOS User Guide for software configuration details. This manual is written in Chinese.
Dell W-AP110 specifications
| Wireless standard | IEEE 802.11a/b/g/n |
|---|---|
| Frequency band 2.4 GHz | 2.4 GHz (802.11b/g/n) |
| Frequency band 5 GHz | 5 GHz (802.11a/n) |
| Ethernet port | 10/100/1000Base-T (RJ-45) |
| Power over Ethernet | IEEE 802.3at PoE+ / 802.3af PoE |
| DC power input | 12 VDC (+/- 5%)/18W |
| Operating system | ArubaOS 6.3.1.0 |
Source: Dell Networking W-AP110 Series Access Point Installation Guide
All Dell W-AP110 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What wireless standards does the Dell W-AP110 support?
It supports IEEE 802.11a/b/g/n.
From: Dell Networking W-AP110 Series Access Point Installation Guide
What Power over Ethernet standards does the W-AP110 support?
It supports IEEE 802.3at PoE+ and 802.3af PoE.
From: Dell Networking W-AP110 Series Access Point Installation Guide
What is included in the package?
The package includes the W-AP114 or W-AP115 access point, 9/16\" and 15/16\" ceiling rail adapters, and the installation guide.
How do I reset the access point to factory defaults?
Power off the AP, press and hold the reset button with a narrow object while powering on, then release after the power LED flashes; the AP reboots using factory default settings.
What are the specific models included in the W-AP110 Series?
The series includes the W-AP114 and W-AP115 wireless access points.
Can the W-AP110 Series be used with controllers from other manufacturers?
No, it works only in conjunction with a Dell Networking W-Series mobility controller.
