Key facts
- Brand
- ABB
- Model
- ACS-800-04
- Documents
- 4
- Languages
- ZH
- Last added
- 2026-10-01
Start here
ABB ACS800-04 Inverter Commissioning Manual
This manual provides step‑by‑step instructions for preparing and powering up the ABB ACS800‑04 inverter. It details control‑panel operations, parameter configuration, and I/O wiring procedures required before the drive can be put into service.
The document also describes fault codes, motor setup, and diagnostic functions such as ACT, FUNC, PAR, and DRIVE displays. It includes tables of default settings and recommended values for voltage, current, frequency, and speed, helping technicians verify proper installation and troubleshoot issues. This manual is written in Chinese.
ABB ACS-800-04 specifications
| Power range | 0.55 kW to 200 kW |
|---|---|
| Maximum DC brake voltage | > 500 V |
| Allowed DC capacitor charge cycles | 5 times per 10 minutes |
All ABB ACS-800-04 documents by type
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
Which fault code indicates a scalar (speed) error?
Fault code 99.04 corresponds to a scalar (speed) error.
What is the power rating range of the ACS800-04 drive module?
The ACS800-04 module is rated for power from 0.55 kW up to 200 kW.
How many times can the DC capacitor group be charged within ten minutes?
The DC capacitor group may be charged up to five times in a ten‑minute period.
What temperature rating is required for power cables?
Cables must be rated for at least 70 °C continuous operation.
How can I verify the drive unit’s label before installation?
Check that the nameplate matches the ordered part, confirming IEC rating, CE mark, model code and serial number.
What safety steps must be taken before working on the ACS800‑04 drive?
Disconnect the input power, wait at least 5 minutes for the internal capacitors to discharge, verify that phase voltages are near zero, and wear a grounding wrist strap.