Key facts
- Brand
- DELL
- Model
- W-IAP228
- Category
- Communications equipment
- Documents
- 4
- Languages
- KO · PT · FR · ZH
- Last added
- 2023-11-25
Start here

Dell W-IAP228 Wireless Instant Access Point Installation Guide
The Dell W-IAP228 is a weatherproof, waterproof, indoor-rated dual-radio IEEE 802.11ac wireless Instant Access Point. It provides high-performance 802.11ac 2.4GHz and 5GHz functions using MIMO technology while supporting existing 802.11a/b/g/n wireless services.
This installation guide covers the hardware overview, pre-installation planning, mounting with the AP-220-MNT-W1 kit, grounding, Ethernet cable connection using cable glands, and post-installation connection checks. The package includes the access point, cable glands, USB console cable, copper lug, M4x8 screw, installation guide, and quick start guide. This manual is written in Korean.
Dell W-IAP228 specifications
| Wireless standard | IEEE 802.11ac dual-radio |
|---|---|
| Frequency bands | 2.4GHz and 5GHz |
| Antenna connectors | 6 RP-SMA connectors |
| Ethernet ports | 2x 10/100/1000Base-T RJ-45 |
| Power over Ethernet | 802.3at PoE |
| Console port | USB Micro-B |
Source: Dell W-IAP228 Wireless Instant Access Point Installation Guide
All Dell W-IAP228 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What Ethernet cable should be used for outdoor installation?
Use a UV-resistant, outdoor, CAT 5E or higher RJ-45 cable, purchased separately.
From: Dell W-IAP228 Wireless Instant Access Point Installation Guide
What kind of access point is the W-IAP228?
It is a weather-resistant, waterproof, indoor-rated, dual-radio IEEE 802.11ac wireless Instant access point (IAP).
From: Dell W-IAP228 Wireless Instant Access Point Installation Guide
How many external antenna connectors does the W-IAP228 have?
The W-IAP228 has six RP-SMA connectors for external antennas.
From: Dell Networking Instant W-IAP228 Wireless Access Point Installation Guide
What are the USB console port settings?
The console settings are 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
From: Dell Networking Instant W-IAP228 Wireless Access Point Installation Guide
What antennas does the W-IAP228 use?
It is designed for use with external antennas and has six RP-SMA connectors for them.
From: Dell Networking W-IAP228 Wireless Access Point Installation Guide
How do I reset the W-IAP228 to factory settings?
Power off the access point, hold the reset button with a thin object, power it on while holding the button, then release after the system LED flashes for 5 seconds; the LED flashes again for 15 seconds to confirm the reset.
From: Dell Networking W-IAP228 Wireless Access Point Installation Guide
