Key facts
- Brand
- Analog Devices
- Model
- ADV7280A
- Category
- Video Decoder
- Documents
- 2
- Languages
- EN · ZH
- Last added
- 2023-10-31
Start here

Analog Devices ADV7280A/ADV7281A/ADV7282A Video Decoders Device Manual
The ADV7280A/ADV7281A/ADV7282A Device Manual (UG-1176) describes the functionality and features of the ADV7280A, ADV7280A-M, ADV7281A-M, ADV7282A, and ADV7282A-M video decoders. The devices automatically detect and convert composite analog baseband video signals compatible with NTSC, PAL, and SECAM standards, and accept CVBS, S-Video (Y/C), and YPbPr inputs.
According to the manual, the analog front end uses a 10-bit ADC and a 4-channel input mux. The document covers STB diagnostics, video processing controls such as ACE, dither, and I2P, output formats including ITU-R BT.656 and MIPI CSI-2, power supply requirements, and I2C register maps.
Analog Devices ADV7280A specifications
| Input video signal range | 1.0 V peak-to-peak at the analog video input pin |
|---|---|
| ADC resolution | 10-bit |
| ADC clock rate (CVBS) | 57.27 MHz |
| ADC clock rate (Y/C S-Video) | 114 MHz |
| ADC clock rate (YPbPr) | 172 MHz |
| Digital output | 8-bit YCrCb 4:2:2 |
| Output interface | 8-bit ITU-R BT.656 |
| MIPI Tx output | 8-bit YCrCb 4:2:2 over MIPI CSI-2 |
| Control interface | 2-wire serial bidirectional, I2C compatible |
| Process | 1.8 V CMOS |
Source: Analog Devices ADV7280A/ADV7281A/ADV7282A Video Decoders Device Manual
All Analog Devices ADV7280A documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What video standards do the ADV7280A/ADV7281A/ADV7282A devices support?
They automatically detect and convert composite analog baseband video signals compatible with NTSC, PAL, and SECAM standards.
From: Analog Devices ADV7280A/ADV7281A/ADV7282A Video Decoders Device Manual
Which models output video over MIPI CSI-2?
The ADV7280A-M, ADV7281A-M, and ADV7282A-M models output an 8-bit YCrCb 4:2:2 video stream over MIPI CSI-2.
From: Analog Devices ADV7280A/ADV7281A/ADV7282A Video Decoders Device Manual
What is the typical power supply voltage for digital I/O?
The DVDDIO range is typically 3.3 V.
From: Analog Devices ADV7280/ADV7280-M Video Decoder Datasheet
What is the maximum number of analog input channels supported by the ADV7280-M model?
The ADV7280-M supports a maximum of 8 input channels.
From: Analog Devices ADV7280/ADV7280-M Video Decoder Datasheet
