Key facts
- Brand
- Analog Devices
- Model
- AD9361
- Category
- Other Electronics
- Industry
- Electronics
- Documents
- 4
- Languages
- EN · ZH
- Last added
- 2026-10-13
Start here

Analog Devices AD9361 Reference Manual
This document is the AD9361 Reference Manual (UG-570) from Analog Devices. It describes initialization and calibration, reference clock requirements, RF and baseband PLL synthesizers, fast lock profiles, the enable state machine, filters, gain control, transmit power control, RF port interfaces, factory calibrations, control outputs, auxiliary ADC/DAC/GPO and temperature sensor functions, baseband synchronization, digital interface specifications, SPI, and power supply and layout guidance.
The manual is intended for engineers and developers working with the AD9361. It notes that complete specifications are in the AD9361 data sheet and that Analog Devices provides complete drivers for the AD9361 for bare metal/No-OS and Linux environments.
Analog Devices AD9361 specifications
| Transmit Band | 46.875 MHz to 6.0 GHz |
|---|---|
| Receive Band | 70 MHz to 6.0 GHz |
| Noise Figure (NF) at 800 MHz | 2 dB |
| Transmit EVM | -40 dB (typical) |
| ADC Resolution | 12 Bits |
| DAC Resolution | 10 Bits |
| LO Frequency Step Size | 2.4 Hz (typical) |
Source: Analog Devices AD9361S-CSL RF Agile Transceiver Data Sheet
All Analog Devices AD9361 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the typical noise figure of this transceiver at 800 MHz?
The device has a noise figure of 2 dB when operating with an LO frequency of 800 MHz.
From: Analog Devices AD9361S-CSL RF Agile Transceiver Data Sheet
What is the maximum output power for the transmitter at 5.5 GHz?
The maximum output power is 6.5 dBm when using a 7 MHz tone into a 50 Ω load.
From: Analog Devices AD9361S-CSL RF Agile Transceiver Data Sheet
What are the applications for this transceiver?
It is designed for use in 3G and 4G applications, including Low Earth orbit satellites, avionics, and point to point communication systems.
From: Analog Devices AD9361S-CSL RF Agile Transceiver Data Sheet
What is the typical noise figure at 800 MHz?
The superior receiver sensitivity features a Noise Figure of 2 dB at an 800 MHz Local Oscillator.
From: Analog Devices AD9361S-CSL RF Agile Transceiver Data Sheet
Where can complete specifications for the AD9361 be found?
Complete specifications for the AD9361 part can be found in the AD9361 data sheet, which is available from Analog Devices, Inc.
Does Analog Devices provide software drivers for the AD9361?
Analog Devices provides complete drivers for the AD9361 for both bare metal/No-OS and operating systems (Linux).
