Key facts
Start here

DS41250F_CN PIC16F913/914/916/917/946 Data Sheet
This is the Chinese-language data sheet DS41250F_CN from Microchip for the PIC16F913/914/916/917/946 family of 8-bit CMOS flash microcontrollers with an LCD driver, offered in 28/40/44/64-pin packages and built on nanoWatt Technology. It opens with a feature summary covering the high-performance RISC CPU, the on-chip oscillator options, low-power modes, and the peripheral set.
The peripheral listing includes the liquid crystal display module with 4 commons, up to 24/35/53 I/O pins with one input-only pin, two analog comparators with a programmable on-chip reference voltage, a 10-bit A/D converter with up to 8 channels, Timer0/Timer1/Timer2, an addressable USART, up to two capture/compare/PWM modules and an SSP port with I2C mode. The following pages give the device memory/I/O selection table and the 40-pin PDIP pinout and pin summary table for the PIC16F914/917. This manual is written in Chinese.
MICROCHIP PIC16F913 specifications
| Instruction set | 35 instructions |
|---|---|
| Oscillator/clock input frequency | DC - 20 MHz |
| Operating voltage range | 2.0V to 5.5V |
| Internal oscillator software-selectable range | 125 kHz to 8 MHz |
| Flash write endurance | 100,000 writes |
| EEPROM write endurance | 1,000,000 writes |
| Flash/data EEPROM retention | >40 years |
| A/D converter | 10-bit resolution, up to 8 channels |
| LCD drive capability | up to 60/96/168 pixels on 28/40/64-pin devices |
| Hardware stack | 8 levels |
| Standby current | <100 nA at 2.0V, typical |
All MICROCHIP PIC16F913 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What is the operating voltage range of the PIC16F913/914/916/917/946?
The devices operate over a wide voltage range of 2.0V to 5.5V.
How many write cycles can the flash and EEPROM memory withstand?
The flash memory withstands 100,000 write operations and the EEPROM 1,000,000 write operations, with data retention of more than 40 years.
How many instructions does the CPU have?
The microcontroller has only 35 instructions to learn.
From: Microchip PIC16F913/914/916/917/946 Microcontrollers Data Sheet
What is the typical standby current at 2.0V?
The typical standby current is less than 100 nA at 2.0V.
From: Microchip PIC16F913/914/916/917/946 Microcontrollers Data Sheet
What is the flash write endurance of the PIC16F913/914/916/917/946 devices?
The flash memory can be written up to 100,000 times.
What is the standby current of these microcontrollers?
Standby current is less than 100 nA at 2.0 V.
