Key facts
- Brand
- Toshiba
- Model
- TLGE68TG
- Industry
- Industrial
- Documents
- 2
- Languages
- JA
- Last added
- 2012-06-01
Start here
Toshiba TLSU268G(F) / TLRME68TG(F) / TLYE68TG(F) / TLGE68TG(F) LED Lamp Datasheet
The document provides detailed electrical and optical characteristics for four Toshiba LED lamp models (TLSU268G(F), TLRME68TG(F), TLYE68TG(F), TLGE68TG(F)). These surface‑mount devices are intended for use in information display panels, amusement equipment indicators, and similar applications. They feature high‑brightness four‑element phosphor material and are available in red, yellow, and green colors with a transparent lens.
In addition to performance data, the sheet includes mounting and soldering recommendations, such as a recommended PCB hole diameter of 0.9 mm, pre‑heat temperature of 120‑150 °C for up to 60 s, and solder‑flow temperature of 260 °C for no more than 5 s. Safety notes warn about infrared emission and handling of GaAs‑containing materials. This manual is written in Japanese.
Toshiba TLGE68TG specifications
| Wavelength (TLSU268G(F)) | 623 nm |
|---|---|
| Mass (standard) | 0.15 g |
| Recommended PCB hole diameter | 0.9 mm |
| Pre‑heat temperature | 120‑150 °C (≤60 s) |
| Solder‑flow temperature | 260 °C (≤5 s) |
Source: Toshiba TLSU268G(F) / TLRME68TG(F) / TLYE68TG(F) / TLGE68TG(F) LED Lamp Datasheet
All Toshiba TLGE68TG documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What PCB hole size should be used for these LED lamps?
A hole diameter of 0.9 mm is recommended.
From: Toshiba TLSU268G(F) / TLRME68TG(F) / TLYE68TG(F) / TLGE68TG(F) LED Lamp Datasheet
What are the recommended soldering temperatures?
Pre‑heat at 120‑150 °C for up to 60 seconds, then solder at 260 °C for no more than 5 seconds.
From: Toshiba TLSU268G(F) / TLRME68TG(F) / TLYE68TG(F) / TLGE68TG(F) LED Lamp Datasheet