Key facts
- Brand
- STMicroelectronics
- Model
- ST10
- Category
- microcontrollers
- Documents
- 31
- Languages
- EN
- Last added
- 2012-08-10
Start here

STMicroelectronics ST10F296E Microcontroller User Manual
The ST10F296E is a 16‑bit microcontroller with a MAC unit, up to 64 MHz CPU clock, 832 KB Flash and 68 KB RAM. It provides a rich set of peripherals including ADC, PWM, CAN, timers and multiple serial interfaces.
This manual describes the device architecture, register map, memory organization, power‑down modes, electrical characteristics and package information, and includes guidelines for bootloader usage and peripheral configuration.
STMicroelectronics ST10 specifications
| On-state rms current | 10 A |
|---|---|
| Static dV/dt immunity | > 2000 V/us |
| Gate triggering current (ACST1010-7) | 10 mA |
| Gate triggering current (ACST1035-7) | 35 mA |
| Operating junction temperature range | -40 to +125 °C |
Source: STMicroelectronics ACST10 Overvoltage Protected AC Switch Datasheet
All STMicroelectronics ST10 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
- STMicroelectronics ACST10 Overvoltage Protected AC Switch Datasheet 13 p
- STMicroelectronics ST10F273Z4 16-bit MCU Datasheet 188 p
- STMicroelectronics ST10F276Z5 16-bit MCU Datasheet 239 p
- ST ST10F269Zx handbook 184 p
- STMicroelectronics ST10F269 16-Bit MCU Datasheet 160 p
- STMicroelectronics ST10R272L 16-Bit Low Voltage ROMless MCU Datasheet 77 p
- STMicroelectronics ST10R172L 16-Bit MCU Datasheet 68 p
- STMicroelectronics ST10R167 16-Bit ROMless MCU Datasheet 63 p
- STMicroelectronics ST10F273M MCU Datasheet 182 p
- STMicroelectronics ST10F272M MCU Datasheet 176 p
- STMicroelectronics ST10F276E 16-bit MCU Datasheet 231 p
- STMicroelectronics ST10F273E 16-bit MCU Datasheet 179 p
- STMicroelectronics ST10F272B/ST10F272E 16-bit MCU Datasheet 188 p
- STMicroelectronics ST10F280 16-Bit MCU Datasheet 186 p
- STMicroelectronics QST108 Capacitive Touch Sensor Datasheet 51 p
How to use the product for one specific task, with worked examples.
- ST AN2182 Application Note 18 p
- STMicroelectronics AN2164 ST10 External Memory Interfacing Application Note 14 p
- STMicroelectronics ST10 with MAC Direct Memory Access Application Note 5 p
- STMicroelectronics AN2500 Application Note 18 p
- ST10 PWM Driver Application Note AN2499 13 p
- ST AN2354 Application note 21 p
- AN2353 Designing an Application with ST10F27x Devices 18 p
- AN2341 STMicroelectronics ST10F27x/F25x CAN Interrupt Drivers Programming Application Note 26 p
- STMicroelectronics AN2340 Application Note ST10 RPD Pin Functionality 10 p
- AN2244 EEPROM Emulation with ST10F27x Embedded Flash Application Note 17 p
- STMicroelectronics AN2168 ST10F27x Hardware Development Application Note 15 p
- STMicroelectronics AN2143 Application Note Programming ST10F27X Flash 8 p
- STMicroelectronics AN1335 ST10F280 Application Note 10 p
- STMicroelectronics AN1496 ST10F269/ST10F280 Flash Programming Application Note 16 p
- STMicroelectronics ST10F269/280 System Reset Application Note AN1334 18 p
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
Does the ACST10 require external overvoltage protection?
No, the device does not need external overvoltage protection because it has built-in overvoltage crowbar technology.
From: STMicroelectronics ACST10 Overvoltage Protected AC Switch Datasheet
Which standard does the ACST10 comply with for surge immunity?
The device enables equipment to meet the IEC 61000-4-5 standard for overvoltage protection.
From: STMicroelectronics ACST10 Overvoltage Protected AC Switch Datasheet
What is the maximum CPU clock frequency?
The maximum CPU clock frequency is 64 MHz.
How much on-chip Flash memory is available?
The device includes 512 Kbyte of on-chip Flash memory.
What is the maximum CPU clock frequency?
The maximum CPU clock frequency is 64 MHz.
What are the available package types?
The device is available in PQFP144 and LQFP144 packages.
