Key facts
- Brand
- DELL
- Model
- W-IAP277
- Category
- Other network devices
- Documents
- 2
- Languages
- KO · EN
- Last added
- 2023-11-25
Start here

Dell W-IAP277 Outdoor Instant Access Point Installation Guide
This installation guide covers the Dell Networking W-IAP277 Outdoor Instant Access Point. It explains the access point's hardware views, LED states, USB console port, Ethernet ports, reset button, AC power interface, and grounding point.
The guide then describes outdoor design and deployment considerations, known RF absorbers and interference sources, and installation and grounding steps. It notes that the W-IAP277 uses AP-270-MNT-H1 or AP-270-MNT-H2 mounting kits, which are sold separately. This manual is written in Korean.
Dell W-IAP277 specifications
| Wireless standards | IEEE 802.11a/b/g/n/ac |
|---|---|
| Ethernet ports | 2 x 10/100/1000Base-T (RJ-45), WAN and LAN |
| AC power input | 100-240 VAC |
| Console port | USB Micro-B |
| Console settings | 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control |
Source: Dell W-IAP277 Outdoor Instant Access Point Installation Guide
All Dell W-IAP277 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What are the console port settings for the W-IAP277?
Use 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
From: Dell W-IAP277 Outdoor Instant Access Point Installation Guide
Which mounting kits can be used with the W-IAP277?
The W-IAP277 can be installed with the AP-270-MNT-H1 or AP-270-MNT-H2 mounting kit, which are sold separately.
From: Dell W-IAP277 Outdoor Instant Access Point Installation Guide
How do I reset the W-IAP277 to factory default settings?
Power off the IAP, press and hold the reset button with a small narrow object, power on without releasing it, then release after the LED flashes; the IAP continues booting with factory default settings.
From: Dell W-IAP277 Outdoor Instant Access Point Installation Guide
What console settings are required for the USB console port?
Use 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
From: Dell W-IAP277 Outdoor Instant Access Point Installation Guide
