Cisco Edge 300 系列 Manuals

ManualLib has 3 documents for the Cisco Edge 300 系列 (Network Switches): 2 installation guides, 1 user manual. Every file can be read online or downloaded as a PDF for free.

Installation Guide 2User Manual 1

Key facts

Brand
Cisco
Model
Edge 300 系列
Industry
Electronics
Documents
3
Languages
ZH · EN
Last added
2026-11-14

Start here

Cisco Edge 300 Series Switch Software Configuration Guide

Cisco Edge 300 Series Switch Software Configuration Guide

User Manual 88 pages · 1.1 MB · EN

This guide explains how to configure Cisco Edge 300 series switches for smart install networks. It covers setting up DHCP and TFTP servers, using GUI or CLI for configuration, managing image and configuration files, and upgrading firmware. The guide assumes users are familiar with basic network administration and switch deployment.

The switches support cloud-based services for indoor environments and can act as client switches in classrooms, hotels, hospitals, and offices. They integrate wired and wireless connectivity and support multimedia applications including video, audio, and PDF playback.

Read online

Cisco Edge 300 系列 specifications

Operating temperature23 to 104°F (–5 to 40°C)
Storage temperature–13 to 158°F (–25 to 70°C)
Relative humidity10% to 90% (non-condensing)
Operating altitudeUp to 10,000 ft (3000 m)
Storage altitudeUp to 15,000 ft (4570 m)
Weight (without brackets)2.43 lb (1.1 kg)
Dimensions (H x W x D)8.27 x 11.42 x 1.22 in (21 x 29 x 3.1 cm)
USB portsFour USB 2.0 Type-A ports
USB power per portUp to 5 W
HDMI output720p or 1080p HD video
Gigabit Ethernet uplink10/100/1000 Mb/s to Catalyst 2000 or 3000 series switches
Ethernet ports10/100 Mb/s to computers or other devices
WiFi802.11b/g/n wireless clients
BluetoothHIDP for remote control or input devices
SafetyIEC 60950-1; GB4943; CCC
EMCChina EMC certification
Wireless markSRRC

Source: Cisco Edge 300 Series Switch Installation Guide

All Cisco Edge 300 系列 documents by type

Installation Guide 2

Mounting, wiring and first power-up. Read it before the hardware goes in.

User Manual 1

Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.

Questions answered in these manuals

How do I power on the Cisco Edge 300 series switch?

Connect the power cord to a power outlet, then press the power button to start the switch.

From: Cisco Edge 300 Series Switch Installation Guide

How do I restore factory settings on the switch?

Press and hold the reset button for more than 5 seconds, then hold the power button until the switch shuts down, and press the power button to restart it.

From: Cisco Edge 300 Series Switch Installation Guide

What is included in the shipping box?

The box contains the switch, power adapter, power cord, mounting kits for wall or desk, screws, wall anchors, zip ties, and mounting brackets.

From: Cisco Edge 300 Series Switch Installation Guide

What are the requirements before installing the switch?

Ensure there is space for LED indicators, AC power cord access, proper cable routing away from noise sources, and that the device is within the specified temperature and humidity limits.

From: Cisco Edge 300 Series Switch Installation Guide

How do I configure DHCP and TFTP servers for smart install?

Configure DHCP servers to assign IP addresses and TFTP servers to host image and configuration files. Use the GUI or CLI to set up these services.

From: Cisco Edge 300 Series Switch Software Configuration Guide

What interfaces does the Cisco Edge 300 switch support?

It supports wired Ethernet interfaces and wireless 802.11b/g/n for connecting input and output devices.

From: Cisco Edge 300 Series Switch Software Configuration Guide