Key facts
- Brand
- Cisco
- Model
- Catalyst 4500E Series
- Category
- Network Switches
- Documents
- 2
- Languages
- ZH
- Last added
- 2026-10-23
Start here

Cisco Catalyst 4500E Series Supervisor Engine 9-E Installation and Configuration Guide
This document introduces the features of the Cisco Catalyst 4500E Series Supervisor Engine 9-E and provides instructions on how to correctly install, remove, or replace the module. It covers chassis compatibility, software requirements, and LED indicator meanings.
The guide details the physical characteristics of the supervisor engine, including the reset switch, USB ports, console ports, and various uplink ports (1GE, 10GE, 40GE). It also explains the function of each LED indicator on the front panel, such as STATUS, UID, DC STATUS, and UPLINK ACTIVE, to assist with configuration and troubleshooting. This manual is written in Chinese.
Cisco Catalyst 4500E Series specifications
| Supported Chassis | Catalyst 4503-E, Catalyst 4506-E, Catalyst 4507R+E, Catalyst 4510R+E |
|---|---|
| Minimum Software Version | Cisco IOS XE version 3.10.0E and ROMMON IOS version 15.1(1r)SG14 |
| Slot Bandwidth | 48Gbps per slot |
| USB Port Standard | USB version 2.0 |
| Management Port Speed | 10/100/1000 |
| Uplink Port Types | Four 1GE or 10GE ports, Two 40GE ports |
Source: Cisco Catalyst 4500E Series Supervisor Engine 9-E Installation and Configuration Guide
All Cisco Catalyst 4500E Series documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
Which chassis are compatible with the Supervisor Engine 9-E?
The engine is supported on Catalyst 4503-E, Catalyst 4506-E, Catalyst 4507R+E, and Catalyst 4510R+E chassis.
From: Cisco Catalyst 4500E Series Supervisor Engine 9-E Installation and Configuration Guide
What is the minimum software version required?
The minimum requirement is Cisco IOS XE version 3.10.0E and ROMMON IOS version 15.1(1r)SG14.
From: Cisco Catalyst 4500E Series Supervisor Engine 9-E Installation and Configuration Guide
Which Power over Ethernet versions does the Catalyst 4500E Series support?
The document lists Cisco prestandard PoE, IEEE 802.3af-compatible PoE, and IEEE 802.3at-compatible PoEP.
From: Cisco Catalyst 4500E Series Ethernet Switch PoE Features and Power Supplies Product Manual
How much power does PoEP provide per port?
IEEE 802.3at-compatible PoEP provides up to 30 W per port over 100 m of Category 5e or higher UTP cable.
From: Cisco Catalyst 4500E Series Ethernet Switch PoE Features and Power Supplies Product Manual
