Installation guide for Cisco Edge 300 series switches covering wall or desktop installation, LEDs, ports, and specifications.
This installation guide explains how to install Cisco Edge 300 series switches on a wall or desktop, and describes the LEDs and ports. It covers box contents, installation steps, powering on, factory reset, and technical specifications.
It also lists model variants, environmental and physical specifications, and compliance information for the switch. This manual is written in Chinese.
| Operating temperature | 23 to 104°F (–5 to 40°C) |
|---|---|
| Storage temperature | –13 to 158°F (–25 to 70°C) |
| Relative humidity | 10% to 90% (non-condensing) |
| Operating altitude | Up to 10,000 ft (3000 m) |
| Storage altitude | Up to 15,000 ft (4570 m) |
| Weight (without brackets) | 2.43 lb (1.1 kg) |
| Dimensions (H x W x D) | 8.27 x 11.42 x 1.22 in (21 x 29 x 3.1 cm) |
| USB ports | Four USB 2.0 Type-A ports |
| USB power per port | Up to 5 W |
| HDMI output | 720p or 1080p HD video |
| Gigabit Ethernet uplink | 10/100/1000 Mb/s to Catalyst 2000 or 3000 series switches |
| Ethernet ports | 10/100 Mb/s to computers or other devices |
| WiFi | 802.11b/g/n wireless clients |
| Bluetooth | HIDP for remote control or input devices |
| Safety | IEC 60950-1; GB4943; CCC |
| EMC | China EMC certification |
| Wireless mark | SRRC |
Connect the power cord to a power outlet, then press the power button to start the switch.
Press and hold the reset button for more than 5 seconds, then hold the power button until the switch shuts down, and press the power button to restart it.
A link is present but there is no activity, and the port is operating at 100 Mb/s.
23 to 104°F (–5 to 40°C).