Key facts
- Brand
- Hitachi
- Model
- L100
- Category
- inverter
- Industry
- Industrial
- Documents
- 5
- Languages
- DE · EN
- Last added
- 2026-11-08
Start here

Hitachi L100-M Series Inverter Quick Reference Guide
This document serves as a quick reference guide for experienced users maintaining existing installations of the Hitachi L100-M Series Inverter. It provides essential information regarding power circuit terminals, control circuit terminal descriptions, and related technical parameters. The guide is intended for reference use only and directs users to the main L100 Inverter Manual for initial installation instructions and safety warnings.
Read onlineHitachi L100 specifications
| Rated output (L100-004NFE) | 1–360 Hz, 200–240 V 3-phase, 2.6 A |
|---|---|
| Input (L100-004NFE) | 50/60 Hz, 200–240 V, 1-phase 5.8 A or 3-phase 3.4 A |
| Power range, N types | 0.25–2.2 kW at 200–240 V (1 or 3-phase) |
| Power range, H types | 0.37–7.5 kW at 380–460 V (3-phase) |
| Permissible ambient temperature | -10 to +40 °C; up to +50 °C with carrier frequency below 2.1 kHz, output current reduced to 80% and cover removed |
| Emission standard | EN 61800-3 (EN 55011 Group 1, Class B) |
| Remote operator interface | RS422 serial interface |
| Max. motor cable length with filter | 50 m |
Source: Hitachi L100 Series Frequency Inverter Product Manual
All Hitachi L100 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
The shortest path to a working setup, usually only a few pages.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What are the L100 series frequency inverters intended for?
They are components for commercial use, intended to control speed-regulated drives with three-phase motors and to be built into machines or assembled with other components into a machine.
How long must I wait after switching off the mains before opening the unit?
At least 5 minutes, because the DC link capacitors remain at dangerously high voltage after the mains is switched off.
What is the maximum input voltage for the L100 Series inverter?
The inverter is suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical amperes, 480 V maximum.
What type of wire must be used for the inverter connections?
You must use 60/75°C Cu wire only or an equivalent type.
What is the purpose of this guide?
This guide is intended for reference use by experienced users in servicing existing installations.
What should I do if the inverter trips on an error?
Press the Stop/Reset key to reset the inverter and clear the error.
