Key facts
Start here

Dell OptiPlex 990 Mini-Tower Service Manual
This document provides detailed instructions for servicing the Dell OptiPlex 990 Mini-Tower computer. It includes safety guidelines, step-by-step procedures for removing and installing internal components such as the cover, expansion cards, memory, hard drive, power supply, and system board. The manual also covers system setup, diagnostic LEDs, beep codes, and error messages to assist with troubleshooting.
Read onlineDell OptiPlex 990 Mini-Tower specifications
| Processor type | Intel Core i3, i5, i7, Pentium, Celeron series |
|---|---|
| Memory Type | DDR3 |
| Memory Speed | 1333 MHz |
| Memory Connectors (Mini-Tower) | four DIMM slots |
| Maximum memory | 8 GB |
| Power Wattage (Mini-Tower) | 265 W |
| Operating Temperature | 10 °C to 35 °C (50 °F to 95 °F) |
| Weight (Mini-Tower) | 8.87 kg (19.55 lb) |
All Dell OptiPlex 990 Mini-Tower documents by type
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What safety precautions should be taken before working inside the computer?
Ensure the work surface is flat and clean, turn off the computer, disconnect all cables, and ground yourself to avoid electrostatic discharge.
How can I verify the computer works correctly after replacing components?
Run the Dell Diagnostics after connecting all external devices and cables.
What tools are recommended for internal repairs?
The manual recommends a small screwdriver, a Phillips screwdriver, a small plastic spudger, and Flash BIOS update media.
How should static electricity be discharged before working inside the computer?
Touch a metal surface without paint, such as a connector on the back of the computer, to eliminate static electricity from your body.
What tools are recommended for working inside the computer?
The recommended tools include a small flathead screwdriver, a Phillips screwdriver, and a plastic pointed instrument.
How should one ground themselves before working inside the computer?
To avoid electrostatic discharges, connect to ground using a wrist strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
