Key facts
Start here

Dell Latitude E5440 Owner's Manual
This manual covers the safe handling of the Dell Latitude E5440 computer, including procedures for powering it down and working inside the chassis. It details the steps for removing and installing various components such as the battery, hard drive, optical drive, keyboard, and system board. This manual is written in Portuguese.
Read onlineDell E5440 specifications
| DRAM bus width | 64-bit |
|---|---|
| Flash EPROM | SPI 32 Mbits + 64 Mbits |
| PCIe bus | Gen1, 100 MHz |
| External bus frequency | DMI (5 GT/s) |
| Processor types | Intel Core i3, i5, and i7 series |
| Processor L3 cache | Up to 8 MB |
| Memory slots | Two SoDIMM slots |
| Memory module capacity per slot | 4 GB or 8 GB |
| Memory type | DDR3 SDRAM 1600 MHz |
| Minimum memory | 4 GB |
| Maximum memory | 16 GB |
| mSATA support | No mSATA support with Express Card I/O and discrete graphics; supported for other configurations |
| Display active area | 344.23 mm x 193.54 mm |
| Display maximum resolution | 1366 x 768 or 1920 x 1080 pixels |
| Display maximum brightness | 220 nits for HD, 300 nits for FHD |
| Display operating angle | 0 degrees (closed) to 135 degrees |
| Display refresh rate | 60 Hz |
| Display pixel pitch (Latitude E5440) | 0.2265 mm x 0.2265 mm |
| Keyboard keys | United States: 86, United Kingdom: 87, Brazil: 87, Japan: 90 |
| Keyboard layout | QWERTY/AZERTY/Kanji |
| Touchpad active area | X-axis 80.00 mm, Y-axis 45.00 mm |
| Battery type | 4-, 6-, or 9-cell smart lithium ion |
| Coin-cell battery | 3 V CR2032 lithium coin cell |
| AC adapter type | 65 W for Latitude E5440, 90 W for Latitude E5540 |
| AC adapter input voltage | 100 VAC to 240 VAC |
| AC adapter rated output voltage | 19.5 +/- 1.0 VDC |
All Dell E5440 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What tools may be needed to remove or install components?
The procedures may require a small flat-blade screwdriver, #0 and #1 Phillips screwdrivers, and a small plastic scribe.
How do I turn off the computer?
Save and close all open files and programs, shut down the operating system, and if needed press and hold the power button for about 4 seconds.
What tools are recommended for component removal?
The recommended tools include a small flathead screwdriver, a Phillips #0 screwdriver, a Phillips #1 screwdriver, and a pointed plastic object.
What is the boot sequence option called?
The boot sequence option is referred to as Boot Sequence (Secuencia de inicio).
What type of battery does the Dell Latitude E5440 use?
It uses a lithium-ion smart battery with 4, 6, or 9 cells.
What is the operating temperature range of the battery?
The battery operates between 0 and 50 °C (32 to 122 °F).
