STMicroelectronics STMPE801 Manuals

ManualLib has 3 documents for the STMicroelectronics STMPE801: 1 datasheet, 2 application notes. Every file can be read online or downloaded as a PDF for free.

Datasheet 1Application Note 2

Key facts

Model
STMPE801
Documents
3
Languages
EN
Last added
2012-08-10

Start here

STMicroelectronics STMPE801 8-bit Port Expander Xpander Logic Datasheet

STMicroelectronics STMPE801 8-bit Port Expander Xpander Logic Datasheet

Datasheet 26 pages · 399 KB · EN

The STMPE801 is an 8-bit GPIO (General Purpose Input/Output) port expander from STMicroelectronics that interfaces a main digital ASIC through a two-line bidirectional I2C bus. Each I/O is configurable as an input or an output, and the device includes an interrupt output pin, a reset input pin and a wake-up feature on each I/O to keep power consumption low. It is offered in QFN16L and SO-16 packages.

This datasheet covers the block diagram, pin connection and pin assignment for both packages, maximum ratings and thermal data, DC electrical characteristics, the I2C module (addresses, timing, start and stop conditions, acknowledge bit, read and write operations, general call, turning the I2C block off and on), the register map, interrupt and power supply behaviour, package mechanical data and the revision history.

Read online

STMicroelectronics STMPE801 specifications

Operating voltage (VCC)1.65 V to 3.6 V
I/O voltage (VIO)1.65 V to 3.6 V
Suspend current< 1 µA
SCL clock frequency (max)400 kHz
Operating ambient temperature-40 to +85 °C
Devices per busUp to 2 devices sharing the same bus (1 address line)
PackagesQFN16L (2.6mm x 1.8mm) and SO-16

Source: STMicroelectronics STMPE801 8-bit Port Expander Xpander Logic Datasheet

All STMicroelectronics STMPE801 documents by type

Datasheet 1

Ratings, dimensions and ordering codes, for selection and design work.

Application Note 2

How to use the product for one specific task, with worked examples.

Questions answered in these manuals

What is the operating voltage of the STMPE801?

The core supply voltage VCC and the I/O supply voltage VIO both range from 1.65 V to 3.6 V.

From: STMicroelectronics STMPE801 8-bit Port Expander Xpander Logic Datasheet

How many devices can share the same I2C bus?

Up to 2 devices can share the same bus using one address line.

From: STMicroelectronics STMPE801 8-bit Port Expander Xpander Logic Datasheet

What is the function of the RESET_N pin?

The Reset pin is an active low input that should be tied HIGH to VIO supply to start normal operation.

From: ST AN2466 handbook

How is the interrupt output polarity configured?

The interrupt output polarity can be configured as active low or active high by setting Bit 0 of the SYSCON register.

From: ST AN2466 handbook

What is the recommended power sequence for the STMPE801?

It is necessary to turn on supply to VIO first and then follow with VCC if they are connected to different supply voltages.

From: STMicroelectronics AN3299 STMPE801 Application Note

What is the minimum pulse width for an external reset signal?

The minimum pulse width of the external reset signal is 100 us.

From: STMicroelectronics AN3299 STMPE801 Application Note