Key facts
- Brand
- STMicroelectronics
- Model
- L6225
- Category
- Motor
- Documents
- 2
- Languages
- EN
- Last added
- 2012-08-09
Start here

STMicroelectronics L6225 DMOS Dual Full Bridge Driver Datasheet
The L6225 is described as a DMOS dual full bridge designed for motor control applications, realized in MultiPower-BCD technology combining isolated DMOS power transistors with CMOS and bipolar circuits on the same chip. It is available in PowerDIP20 (16+2+2), PowerSO20 and SO20(16+2+2) packages and features non-dissipative protection of the high-side PowerMOSFETs and thermal shutdown.
The datasheet gives absolute maximum and recommended operating conditions, thermal data, pin connections and pin descriptions, electrical characteristics, switching and overcurrent timing definitions, and a circuit description. The circuit description covers two independent power MOS full bridges, a charge pump using VBOOT and VCP, TTL/CMOS-compatible logic inputs, ENA and ENB driving configurations, and a truth table.
STMicroelectronics L6225 specifications
| Operating supply voltage | 8 to 52 V |
|---|---|
| Output peak current | 2.8 A peak (1.4 A DC) |
| RDS(ON) | 0.73 Ω typical at Tj = 25 °C |
| Operating frequency | Up to 100 kHz |
| Absolute maximum supply voltage | 60 V |
| RMS output current | 1.4 A |
| Thermal shutdown temperature | 165 °C |
| Packages | PowerDIP20 (16+2+2), PowerSO20, SO20(16+2+2) |
| Switching frequency | 100 kHz |
Source: STMicroelectronics L6225 DMOS Dual Full Bridge Driver Datasheet
All STMicroelectronics L6225 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
How to use the product for one specific task, with worked examples.
Questions answered in these manuals
What motor application is listed for the L6225?
Bipolar stepper motor is listed as a typical application, along with dual or quad DC motor.
From: STMicroelectronics L6225 DMOS Dual Full Bridge Driver Datasheet
What is the operating supply voltage range?
The operating supply voltage ranges from 8 V to 52 V.
From: STMicroelectronics L6225 DMOS Dual Full Bridge Driver Datasheet
What type of motors are these ICs designed to drive?
They are specifically developed to drive a wide range of motors including DC and stepper motors.
From: STMicroelectronics AN2836 Application Note for L6225/6/7 Dual Full-Bridge Drivers
What is the fixed overcurrent protection trip point for the L6225 and L6227?
The overcurrent protection trip point is set at 2.8 A for both the L6225 and L6227.
From: STMicroelectronics AN2836 Application Note for L6225/6/7 Dual Full-Bridge Drivers
