Key facts
- Manuals
- 175
- Models
- 5
- Brands
- 1
- Languages
- EN · ZH · JA · PT
- Last added
- 2026-10-03
Motor models by brand
Featured Motor manuals
Freescale TWR-56F8257 & TWR-MC-LV3PH BLDC Motor Control with Hall Sensors Application Note
This application note explains the design of a three‑phase brushless DC (BLDC) motor drive built around the Freescale MC56F8257 digital signal controller and the TWR‑MC‑LV3PH low‑voltage power stage. It covers system description, hardware configuration, software architecture, and the use of the FreeMASTER visualization tool for monitoring and tuning.
Key features include Hall‑sensor based speed‑closed loop control, bidirectional rotation, fault protection (over‑voltage, under‑voltage, over‑current), and a user interface via push‑buttons or the FreeMASTER PC software. The document also provides peripheral configuration details and example code snippets.
Covers: Introduction · System description · System concept · Software design · Speed control · Commutation
Kollmorgen AKD Digital Drive Installation Guide
This installation guide provides step‑by‑step instructions for safely installing and commissioning the AKD series digital drives (AKD, AKD BASIC, AKD PDMM). It includes safety notes, handling, packaging, and detailed mechanical and electrical installation procedures.
The document also describes configuration using Kollmorgen WorkBench or KAS IDE software, wiring diagrams for power, I/O, and communication interfaces, and troubleshooting tips. Technical specifications such as voltage ranges, resolution, and output current are listed in the technical data section.
Covers: Overview · Safety · Handling and Packaging · Certification · Mechanical Installation · Electrical Installation
CDJ1 Digital Motor Soft Starter User Manual
The CDJ1 series is a digital soft starter designed for three‑phase cage‑type induction motors, offering functions such as voltage‑ramp start, current‑limit start, soft stop, and multiple protection features. It supports motor powers from 5.5 kW up to 600 kW and is used in various industrial applications.
The manual covers safety precautions, purchase inspection, installation guidelines, basic and secondary wiring diagrams, operating principles, keyboard/display description, dimensions, troubleshooting procedures, and MODBUS communication protocol details. This manual is written in Chinese.
Covers: Overview · Purchase Inspection · Installation · Basic Wiring Diagram · Operating Principle · Keyboard and Display Description
HamDerBurg DBL-3650H Brushless DC Motor Driver User Manual
The DBL-3650H is a high‑current brushless DC motor driver developed by HamDerBurg. It features a built‑in PID speed and current loop, supports multiple speed‑control methods, and is intended for large‑scale automation equipment and instruments.
The manual provides detailed product specifications, wiring diagrams, interface definitions, configuration settings, and safety guidelines to ensure proper installation, operation, and maintenance of the driver. This manual is written in Chinese.
Covers: Product Overview · Electrical, Mechanical and Environmental Specifications · Driver Interface and Wiring · Control Interface Functions · Typical Wiring Diagram · SW DIP Switch Settings
Latest Motor manuals
Freescale TWR-56F8257 & TWR-MC-LV3PH BLDC Motor Control with Hall Sensors Application Note
Other 28 pages · 2.1 MB · ENApplication note describing a three‑phase BLDC motor drive using Freescale TWR‑56F8257 and TWR‑MC‑LV3PH boards with Hall‑sensor speed control.
Kollmorgen AKD Digital Drive Installation Guide
Installation Guide 212 pages · 17 MB · ENInstallation guide for Kollmorgen AKD digital drives covering safety, mechanical and electrical setup, and configuration using WorkBench.
CDJ1 Digital Motor Soft Starter User Manual
User Manual 41 pages · 6.1 MB · ZHThe CDJ1 digital motor soft starter user manual provides safety instructions, installation steps, wiring diagrams, operation principles, and troubleshooting…
HamDerBurg DBL-3650H Brushless DC Motor Driver User Manual
User Manual 10 pages · 728 KB · ZHUser manual for the HamDerBurg DBL-3650H brushless DC motor driver, covering specifications, wiring, control functions and safety precautions.
ST STM32 PMSM FOC SDK v4.2 Three-Phase Motor Control Solution and Applications
Application Note 28 pages · 2.1 MB · ZHThis ST document presents the STM32 PMSM FOC SDK v4.2, covering firmware, motor profiler, PC GUI tools, and example applications such as gimbals, 3D…
ChipSourceTek CST118 S Motor Driver Chip Datasheet
Datasheet 6 pages · 986 KB · ZHThe ChipSourceTek CST118 S is a single‑channel MOS full‑bridge motor driver IC with built‑in protection, low on‑resistance and SOP‑8 package.
Kinco 3M2280N Stepper Driver User Manual
User Manual 34 pages · 1.3 MB · ZHThe Kinco 3M2280N stepper driver user manual provides safety guidelines, product overview, specifications, installation instructions and troubleshooting.
JMC 2H S S 57-A Hybrid Stepper Servo Drive Manual
User Manual 26 pages · 1.5 MB · ENThe JMC 2H S S 57-A manual provides overview, features, wiring, settings, specifications and troubleshooting for the hybrid stepper‑servo drive.
Yaskawa Σ‑V series AC Servo Drive User Manual
User Manual 337 pages · 10.8 MB · JAThe Yaskawa Σ‑V series AC servo drive manual provides design, installation, adjustment, safety, and troubleshooting information for large‑capacity servo…
Danfoss FCM 300 Motor Datasheet
Datasheet 38 pages · 2 MB · ENTechnical specifications, ordering information and installation details for the Danfoss FCM 300 series motor.
Servotronix CDHD Servo Drive Quick Start Guide
Quick Start Guide 68 pages · 12.1 MB · ZHQuick start guide for Servotronix CDHD servo drives covering installation, wiring, safety and basic configuration.
Mercury Marine Verado 350 SCi Outboard Engine Operation, Maintenance and Warranty Manual
User Manual 105 pages · 4.7 MB · PTThe Mercury Marine Verado 350 SCi manual provides operation, maintenance, safety, and warranty information for the outboard engine.
Crouzet Motors SMI21 CANop en Safety User Manual
User Manual 20 pages · 484 KB · ENSafety user manual for the Crouzet Motors SMI21 CANop en brushless motor, covering safety, installation, operation, diagnostics and maintenance.
Texas Instruments DRV8833 Dual H‑Bridge Motor Driver Datasheet
Datasheet 22 pages · 963 KB · ZHThe DRV8833 is a dual H‑bridge motor driver that supports two DC motors or one stepper motor with up to 1.5 A RMS per bridge.
Three-Phase Motor Use and Maintenance Guide
Service Manual 5 pages · 9 KB · ZHAn illustrated guide covering operation, common faults, maintenance techniques, and testing methods for three‑phase AC motors.
Which document do I need?
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Application Note
How to use the product for one specific task, with worked examples.
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
Quick Start Guide
The shortest path to a working setup, usually only a few pages.
Service Manual
Disassembly, diagnostics and part numbers, for repair.
Questions answered in Motor manuals
What are the cable cross‑section requirements for the AKD drive?
Cable cross‑section and requirements are detailed in section 7.12.2 of the guide.
Which communication interfaces are supported by the AKD series?
The AKD drives support CAN‑BUS, EtherCAT, Ethernet/IP, PROFINET RT, sercos® III, Modbus TCP, and SynqNet as listed in the overview section.
How is the CDJ1 soft starter connected to a three‑phase motor?
The main power terminals L1, L2, L3 connect to the three‑phase supply, while output terminals T1, T2, T3 connect to the motor phases U, V, W; bypass contacts and grounding are also provided.
What is the recommended operating temperature range for the driver?
The driver operates from –10 °C to 55 °C; an alarm is triggered when the enclosure reaches +80 °C.
From: HamDerBurg DBL-3650H Brushless DC Motor Driver User Manual
What is the maximum continuous current the driver can supply?
The driver can supply a continuous current of 25 A.
From: HamDerBurg DBL-3650H Brushless DC Motor Driver User Manual
What is the recommended supply voltage range for the CST118 S?
The recommended supply voltage (VCC) is 2.4 V to 7.2 V.