Key facts
- Brand
- DELL
- Model
- FS7610
- Category
- Storage devices
- Industry
- Computers
- Documents
- 2
- Languages
- ZH
- Last added
- 2026-10-26
Start here
Dell EqualLogic FS7610 Installation and Setup Guide
This manual provides instructions for installing and configuring the Dell EqualLogic FS7610 Network Attached Storage (NAS) device. It is intended for hardware administrators responsible for maintaining the EqualLogic FS7610 hardware. The guide covers pre-installation tasks, hardware rack installation, power connection, network cabling, and NAS cluster configuration. This manual is written in Chinese.
Read onlineDell FS7610 specifications
| Height | 86.4 mm (3.4 inches) |
|---|---|
| Width (with rack flanges) | 481.5 mm (18.96 inches) |
| Weight (maximum configuration) | 30.5 kg (67 lbs) |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Operating Relative Humidity | 20% to 80% (non-condensing) |
| Power Output | 717 Watts |
All Dell FS7610 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What is the minimum number of people required for installation?
At least two people are required to install the hardware.
What firmware version is required for the PS Series group?
The EqualLogic FS7610 requires PS Series firmware version 6.0 or higher.
How should a controller be safely replaced in the FS7610?
Only qualified support personnel should perform the replacement. Press and hold the service button for 10 seconds to generate an SCI, then follow the uninstall and install procedures described in the manual.
What are the power requirements for the FS7610?
Each power supply provides up to 717 W and accepts an input voltage range of 90 VAC to 264 VAC.