Key facts
- Brand
- DELL
- Model
- PS4110
- Category
- Storage devices
- Documents
- 4
- Languages
- FR · ES · JA · EN
- Last added
- 2023-11-24
Start here

Dell EqualLogic PS4110 Storage Arrays Configuration and Installation Guide
This Dell EqualLogic PS4110 Configuration and Installation Guide describes hardware installation, software configuration, and initial use of the PS4110 iSCSI storage array. It is written for administrators responsible for installing the array hardware.
The guide covers rack mounting, network and power cabling, PS Series software setup, RAID policy for members, volume creation, and post-configuration group tasks. It also includes physical and environmental specifications for the PS4110. This manual is written in Spanish.
Dell PS4110 specifications
| Width | 44,63 cm (17,57 inches) |
|---|---|
| Depth (3.5-inch models) | 59,4 cm (23,4 inches) |
| Depth (2.5-inch models) | 54,1 cm (21,3 inches) |
| Weight fully loaded (3.5-inch) | 29,2 kg (64 lb) |
| Weight fully loaded (2.5-inch) | 24,1 kg (53 lb) |
| Operating temperature | 5 °C to 50 °C |
| Storage temperature | -40 to 65 °C |
| Operating humidity | 20 to 80% |
Source: Dell EqualLogic PS4110 Storage Arrays Configuration and Installation Guide
All Dell PS4110 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What type of rack is required for the PS4110?
A standard 19-inch four-post rack meeting EIA-310-D with universal square holes or round hole spacing is required.
From: Dell EqualLogic PS4110 Storage Arrays Configuration and Installation Guide
What does a volume appear as on the network?
On the network, a volume appears as an iSCSI target.
From: Dell EqualLogic PS4110 Storage Arrays Configuration and Installation Guide
How do I identify a failed drive?
A drive failure is indicated by LEDs on the drive, a message on the console or event log, or indications in the Group Manager Member Disks window.
Can I remove a power supply while the array is running?
Yes, power supply and cooling modules are hot-swappable, but the array can operate on a single power supply for a maximum of five minutes.
