Dell EqualLogic FS7610 Installation and Setup Guide

This guide details the installation and setup of the Dell EqualLogic FS7610 NAS device, covering hardware mounting, power connection, network configuration…

Brand: DELL
Category: Storage devices
Document type: Installation Guide
Language: Chinese
Pages: 42
File format: PDF
File size: 2.3 MB
Published: 26 October, 2026
Updated: 26 October, 2026
Model: FS7610
MD5 checksum: F6144C032FE726A4606682F5FD8C78E6
PDF: Dell EqualLogic FS7610 Installation and Setup Guide PDF

About this manual

This manual provides instructions for installing and configuring the Dell EqualLogic FS7610 Network Attached Storage (NAS) device. It is intended for hardware administrators responsible for maintaining the EqualLogic FS7610 hardware. The guide covers pre-installation tasks, hardware rack installation, power connection, network cabling, and NAS cluster configuration. This manual is written in Chinese.

What's inside

EqualLogic Introduction
Pre-installation Tasks
Safety Guidelines
Hardware Rack Installation
Power Connection
Network Cable Connection
NAS Cluster Configuration
NAS Storage Allocation
Next Steps

Specifications

Height	86.4 mm (3.4 inches)
Width (with rack flanges)	481.5 mm (18.96 inches)
Weight (maximum configuration)	30.5 kg (67 lbs)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Operating Relative Humidity	20% to 80% (non-condensing)
Power Output	717 Watts

Frequently asked questions

What is the minimum number of people required for installation?

At least two people are required to install the hardware.

What firmware version is required for the PS Series group?

The EqualLogic FS7610 requires PS Series firmware version 6.0 or higher.

Can SFP+ and 10GBASE-T controllers be used simultaneously?

No, SFP+ and 10GBASE-T controllers cannot be used in the same device.

Download PDF (2.3 MB)