Key facts
- Brand
- TP-Link
- Model
- TL-SG1005P
- Category
- Network Switches
- Industry
- Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2026-11-17
Start here

TP-Link TL-SG1005P 5-Port Gigabit Desktop Switch with 4-Port PoE Installation Guide
The TP-Link TL-SG1005P is a 5-port Gigabit desktop switch with four PoE ports. The installation guide lists the package contents, shows connection examples for PoE devices such as IP cameras, APs, and IP phones, and explains the Power, PoE MAX, and Link/Act/PoE status LEDs. It also provides FAQs and specifications, including a maximum PoE power of 15.4W per port and 56W total for all PoE ports.
The guide notes that PoE ports can also connect to non-PoE devices but only transmit data. The FAQ explains troubleshooting for the Power LED and Link/Act LED, and notes that when total PoE consumption exceeds 56W, the system cuts off power to port 4.
TP-Link TL-SG1005P specifications
| Standard protocol | IEEE802.3i, 802.3u, 802.3ab, 802.3x, 802.3af, 802.1p |
|---|---|
| Interface | 5 10/100/1000Mbps RJ45 ports, auto-negotiation MDI/MDIX |
| PoE ports | Ports 1-4 |
| Total PoE power supply | 56W |
| Maximum PoE power per port | 15.4W |
| Switching capacity | 10Gbps |
| MAC address table | 2K |
| Transfer method | Store-and-Forward |
| Power supply | External power adapter; input 100-240VAC, 50/60Hz; output 48VDC/1.25A |
| Operating temperature | 0˚C to 40˚C (32˚F to 104˚F) |
| Storage temperature | -40˚C to 70˚C (-40˚F to 158˚F) |
| Operating humidity | 10% to 90%RH non-condensing |
| Storage humidity | 5% to 95%RH non-condensing |
Source: TP-Link TL-SG1005P 5-Port Gigabit Desktop Switch with 4-Port PoE Installation Guide
All TP-Link TL-SG1005P documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Why is the Power LED not lit?
Check that the AC power cord is properly connected to the switch and power source, that the supply voltage meets the switch input voltage requirements, and that the power source is ON.
From: TP-Link TL-SG1005P 5-Port Gigabit Desktop Switch with 4-Port PoE Installation Guide
Why is the Link/Act LED not lit while a device is connected to the corresponding port?
Make sure the cable connectors are firmly plugged into the switch and the connected device, the device is turned on and working normally, and the cable is less than 100 meters (328 feet) long.
From: TP-Link TL-SG1005P 5-Port Gigabit Desktop Switch with 4-Port PoE Installation Guide
Why is the Power LED not lit?
Make sure the AC power cord is connected to the switch with a proper power source, that the supply voltage meets the switch input voltage requirement, and that the power source is on.
From: TP-Link TL-SG1005P 5-Port Gigabit Desktop PoE Switch Installation Guide
Why is the Link/Act LED not lit while a device is connected to the corresponding port?
Check that the cable connectors are firmly plugged into the switch and the device, that the connected device is turned on and working normally, and that the cable is less than 100 meters (328 feet) long.
From: TP-Link TL-SG1005P 5-Port Gigabit Desktop PoE Switch Installation Guide
