Danfoss 100 FLOW Error Codes

92 codes from pages 292–316 of the manual

This is the list of fault codes the Danfoss manual gives for the 100 FLOW Danfoss 100 FLOW. Find your code below and open it for what the manual says about its causes and what to do.

Fault codes from p. 293

CodeWhat it meansPage
ID 10 Overvoltage (Hardware Fault) p. 293
ID 11 Overvoltage (Software Fault) p. 293
ID 40 Charging Switch p. 294
ID 600 System Fault p. 294
ID 601 System Fault p. 294
ID 602 System Fault p. 294
ID 603 System Fault p. 295
ID 604 System Fault p. 295
ID 607 System Fault p. 295
ID 608 System Fault p. 296
ID 609 System Fault p. 296
ID 610 System Fault p. 296
ID 614 System Fault p. 296
ID 647 System Fault p. 296
ID 648 System Fault p. 297
ID 649 System Fault p. 297
ID 667 System Fault p. 297
ID 670 System Fault p. 297
ID 827 System Fault p. 297
ID 828 System Fault p. 297
8 System Fault p. 298
9 Undervoltage (Fault) p. 298
10 Input Phase p. 299
11 ID 100 - Output Phase Supervision p. 299
13 ID 120 - AC Drive Undertemperature (Fault) p. 299
14 ID 130 - AC Drive Overtemperature (Fault, Heat Sink) p. 299
ID 133 AC Drive Overtemperature (Alarm, Board) p. 300
ID 134 AC Drive Overtemperature (Fault) p. 300
ID 136 Overvoltage Protection Circuit Temperature (Alarm) p. 300
ID 137 Overvoltage Protection Circuit Temperature (Fault) p. 300
15 Motor Stall p. 301
16 Motor Overtemperature p. 301
17 Motor Underload p. 301
18 Unbalance p. 301
ID 171 Unbalance p. 302
ID 173 Unbalance (Alarm) p. 302
ID 180 Power Overload (Short-time Supervision) p. 302
ID 240 Motor Control Fault p. 302
25 Motor Control Fault p. 303
26 Start-up Prevented p. 303
29 ATEX Thermistor p. 303
30 Safe Off p. 303
ID 521 Safety diagnostics p. 305
ID 522 Safety diagnostics p. 305
ID 311 Fan Cooling p. 305
ID 312 Fan Cooling p. 305
ID 320 Fire Mode Enabled p. 305
ID 361 Device Changed (Same Type) p. 306
ID 362 Device Changed (Same Type) p. 306
ID 363 Device Changed (Same Type) p. 306
ID 364 Device Changed (Same Type) p. 306
ID 365 Device Changed (Same Type) p. 306
ID 372 Device Added (Same Type) p. 306
ID 373 Device Added (Same Type) p. 306
ID 374 Device Added (Same Type) p. 306
12.3.89 Fault Code 44, ID 431 - Device Changed (Different Type) p. 308
12.3.90 Fault Code 44, ID 433 - Device Changed (Different Type) p. 308
12.3.91 Fault Code 44, ID 434 - Device Changed (Different Type) p. 308
12.3.92 Fault Code 44, ID 435 - Device Changed (Different Type) p. 308
12.3.93 Fault Code 45, ID 441 - Device Added (Different Type) p. 308
12.3.94 Fault Code 45, ID 443 - Device Added (Different Type) p. 308
12.3.95 Fault Code 45, ID 444 - Device Added (Different Type) p. 308
45 Device Added (Different Type) p. 309
46 Real Time Clock p. 309
47 Software Updated p. 309
50 AI Low Fault p. 309
51 Device External Fault p. 309
52 Keypad Communication Fault p. 309
53 Fieldbus Communication Fault p. 310
54 Slot A fault p. 310
57 Identification p. 311
63 Quick Stop Fault p. 311
65 PC Communication Fault p. 312
66 Thermistor Input 1 Fault p. 312
68 Maintenance Counter 1 Alarm p. 312
69 Fieldbus Mapping Error p. 313
70 BaselineRun Failed p. 313
71 Stator Winding: Current Warning S1 p. 313
76 Start Prevented p. 314
77 ID 1077 - > 5 Connections p. 315
78 ID 1078 - Identification Ongoing p. 315
100 ID 1100 - Soft Fill Timeout p. 315
101 ID 1101 - Feedback Supervision Fault (PID 1) p. 315
105 ID 1105 - Feedback Supervision Fault (ExtPID) p. 315
109 ID 1109 - Input Pressure Supervision p. 315
1409 ID 1409 - Input Pressure Supervision p. 315
111 Temperature Fault 1 p. 316
1315 Temperature Fault 1 p. 316
1316 Temperature Fault 2 p. 316
1317 Temperature Fault 2 p. 316
1318 Temperature Fault 2 p. 316
1113 Pump Running Time p. 316

Codes and descriptions are taken from the manufacturer’s manual; page numbers link to the PDF. ManualLib is not affiliated with Danfoss. Found a mistake? Report an error.