Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeTelit 1vv0300989 Rev. 14 Error 840: SSL disconnected

  Code 840 means the SSL is disconnected. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 839: SSL error during handshake

  Code 839 means an SSL error occurred during handshake. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 838: SSL error enc/dec data

  Code 838 means an SSL error occurred during encryption/decryption of data. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 837: SSL certs and keys wrong or not stored

  Code 837 means the SSL certs and keys are wrong or not stored. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 836: SSL not activated

  Code 836 means the SSL is not activated. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 835: SSL already activated

  Code 835 means the SSL is already activated. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 834: SSL already connected

  Code 834 means the SSL is already connected. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 833: SSL not connected

  Code 833 means the SSL is not connected. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 832: SSL socket error

  Code 832 means an SSL socket error occurred. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 831: SSL cannot activate

  Code 831 means the SSL cannot activate. The manual lists no action for this code.

• CodeTelit 1vv0300989 Rev. 14 Error 830: SSL generic error

  Code 830 means an SSL generic error occurred. The manual lists no action for this code.

• Code listTelit 1vv0300989 Rev. 14 Error Codes

  All 11 error codes of the Telit 1vv0300989 Rev. 14 Telit 1vv0300989 Rev. 14 with their meaning, causes and what to do, taken from the manufacturer's manual with page references.

• CodeMELSERVO MR-J2S- /L50132B Error EE: SSCNET error warning

  SSCNET error warning when connected controller is not SSCNET-compatible. The manual lists no action for this code.

• CodeMELSERVO MR-J2S- /L50132B Error E9: Main circuit off warning

  Main circuit off warning from servo being switched on with main power off. The manual's first action is: “Switch on main circuit power.”

• CodeMELSERVO MR-J2S- /L50132B Error E7: Controller emergency stop warning

  Controller emergency stop warning due to emergency stop signal entry. The manual's first action is: “Ensure safety and deactivate emergency stop.”