Key facts
- Brand
- DELL
- Model
- SC1425
- Category
- Servers Computer
- Documents
- 3
- Languages
- FR · EN
- Last added
- 2023-11-24
Start here

Dell PowerEdge SC1425 Systems User's Guide
This guide covers the Dell PowerEdge SC1425 system, including system overview, using Dell OpenManage Server Assistant, the system setup program, technical specifications, and console redirection.
It also describes hardware and software requirements and the steps for configuring host and client systems for remote management, including supported escape sequences.
Dell SC1425 specifications
| Processor type | Up to two Intel Xeon processors with a minimum clock speed of at least 2.8 GHz |
|---|---|
| Front-side bus speed | 800 MHz |
| Secondary cache | At least 1 MB internal cache |
| Bus type | PCI, PCI-X |
| Expansion slots | PCI-X: one 3.3-V, full-length, 64-bit, 133 MHz |
| Memory architecture | 72-bit, ECC, PC-3200, unbuffered, DDR II SDRAM, DIMMs, rated for 400-MHz operation |
| Memory module sockets | Six 240-pin |
| Memory module capacities | 256 MB, 512 MB, 1 GB, or 2 GB |
| Minimum RAM | 256 MB (one 256-MB module) |
| Maximum RAM | 12 GB (when available) |
| SCSI hard drive | Up to two non-hot-plug, 1-inch, internal SCSI drives with an optional SCSI controller card |
| SATA hard drive | Up to two non-hot-plug, 1-inch, internal SATA hard drives with the integrated SATA controller |
| Diskette drive | External optional USB, 1.3 inch, 1.44 MB |
| Optical drive | One optional CD, DVD, or CD-RW/DVD-ROM combo |
| Flash drive | External optional USB |
| Back NIC connectors | Two RJ-45 (for integrated 1-Gigabit NICs) |
| PS/2 keyboard connector | 6-pin mini-DIN |
| PS/2 mouse connector | 6-pin mini-DIN |
| Serial connector | 9-pin, DTE, 16550-compatible |
| Back USB connectors | Two 4-pin, USB 2.0 compliant |
| Video connector | 15-pin VGA |
| Front USB connectors | Two 4-pin, USB 2.0 compliant |
| IDE channel | One 40-pin |
| SATA channel | Two 7-pin |
| Video type | ATI Radeon 7000-M video controller; VGA connector |
| Video memory | 16 MB |
| Power supply voltage | 100-240V, 6-3A, 50/60 Hz |
| Heat dissipation | 1876 BTU/hr maximum |
| System battery | CR 2032 3.0-V lithium ion coin cell |
| Height | 4.3 cm (1.68 inches) |
| Width | 43.7 cm (17.2 inches) |
| Depth | 61.0 cm (24.0 inches) |
| Weight (maximum configuration) | 12.7 kg (28 lb) |
| Operating temperature | 10° to 35°C (50° to 95°F) |
| Storage temperature | -40° to 65°C (-40° to 149°F) |
| Operating relative humidity | 8% to 85% (noncondensing) |
| Storage relative humidity | 5% to 95% (noncondensing) |
| Operating vibration | 0.25 G at 3-200 Hz for 15 min |
| Storage vibration | 0.5 G at 3-200 Hz for 15 min |
| Operating shock | 41 G for up to 2 ms |
| Storage shock | 71 G for up to 2 ms |
| Operating altitude | -16 to 3048 m (-50 to 10,000 ft) |
| Storage altitude | -16 to 10,600 m (-50 to 35,000 ft) |
All Dell SC1425 documents by type
Disassembly, diagnostics and part numbers, for repair.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the default designation of the integrated serial connector?
COM1.
From: Dell PowerEdge SC1425 Installation and Troubleshooting Guide
What happens when an expansion card's serial connector has the same designation as the integrated serial connector?
The system readdresses the integrated serial connector to the next available designation.
From: Dell PowerEdge SC1425 Installation and Troubleshooting Guide
What terminal emulation and baud rates are supported for console redirection?
Console redirection supports VT 100/220 or ANSI terminal emulation and 9600, 19.2 K, 57.6 K, or 115.2 K bps.
How much memory can the SC1425 support?
It has six 240-pin memory module sockets and supports up to 12 GB of RAM.
What is the default designation of the integrated serial connector?
The default designation is COM1.
From: Dell PowerEdge SC1425 Server System Installation and Troubleshooting Guide
What happens when a video card is installed?
The system's integrated video controller is automatically disabled.
From: Dell PowerEdge SC1425 Server System Installation and Troubleshooting Guide
