Key facts
- Brand
- DELL
- Model
- W-IAP108
- Category
- Communications equipment
- Documents
- 4
- Languages
- ZH · EN · ES
- Last added
- 2026-09-30
Start here

Dell W-IAP108/W-IAP109 Instant Access Point Installation Guide
The guide provides a step‑by‑step installation process for the Dell PowerConnect W‑IAP108 and W‑IAP109 Instant access points. It includes hardware descriptions, antenna connections, reset procedures, power options, and LED status indicators.
Additional sections cover desktop mounting, cable connections, verification of successful startup, and instructions for converting the device to Remote AP (RAP) mode. Electrical specifications, compliance information, and safety warnings are also included. This manual is written in Chinese.
Dell W-IAP108 specifications
| Ethernet ports | 1 × 10/100/1000Base‑T auto‑sensing RJ‑45, 1 × 10/100Base‑T auto‑sensing RJ‑45 |
|---|---|
| PoE support | IEEE 802.3af and 802.3at (56 V DC, 350 mA) |
| Power input | 12 VDC external adapter; also supports PoE |
| Maximum power consumption | 12.5 W (no USB), 15 W (with USB) |
| Dimensions | 160 mm × 160 mm × 41 mm |
| Operating temperature | 0 °C to +40 °C |
| Storage temperature | -40 °C to +70 °C |
Source: Dell W-IAP108/W-IAP109 Instant Access Point Installation Guide
All Dell W-IAP108 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
How do I reset the access point to factory defaults?
Power off the AP, press and hold the reset button with a pin, power it on while holding the button, release after the power LED flashes, and wait for the LED to flash again indicating reset completion.
From: Dell W-IAP108/W-IAP109 Instant Access Point Installation Guide
What LEDs indicate the status of the device?
PWR shows power status, ENET0/ENET1 indicate Ethernet link speed, 2.4 GHz and 5 GHz LEDs show wireless radio status, and the 56 Hz LED shows the 802.11a/b/g/n radio status.
From: Dell W-IAP108/W-IAP109 Instant Access Point Installation Guide
How do I reset the W-IAP108/W-IAP109 to factory defaults?
Power off the AP, press and hold the reset button with a small object, power on without releasing, release after the power LED flashes twice.
From: Dell W-IAP108/109 Instant Access Point Installation Guide
What is the default login for the W-IAP108/W-IAP109?
The default username is admin and the default password is admin.
From: Dell W-IAP108/109 Instant Access Point Installation Guide
How do I convert the W-IAP108/109 to Remote AP (RAP) mode?
Connect to the Instant SSID, log in to the device’s web UI, go to Maintenance > Convert, select 'Remote APs managed by a Mobility Controller', enter the controller’s IP address, and click 'Convert Now'.
From: Dell W-IAP108/109 Instant Access Point Installation Guide
What is the purpose of the USB interface on the W-IAP108/W-IAP109?
The USB interface is used to connect a cellular modem.
From: Dell W-IAP108/109 Instant Access Point Installation Guide
