Key facts
- Brand
- SONY
- Model
- SNC-CH110
- Category
- Monitoring Equipment
- Industry
- Electronics
- Documents
- 2
- Languages
- EN · JA
- Last added
- 2012-05-02
Start here
SONY SNC-CH110/CH210 SNC-DH210/DH210T net camcorder Manual
The manual explains how to install and configure the network camcorders, including IP address assignment, PoE support, and video streaming settings. It also covers the use of the SNC Toolbox, Windows firewall configuration, and security features such as SSL and SNMP.
Key features described are the high‑resolution imaging (up to 2048 × 1536), 30 fps HD video, Exmor CMOS sensor, back‑light compensation, and date‑time stamping. The document provides step‑by‑step procedures for PTZ control, FTP upload, and using the plug‑in‑free viewer. This manual is written in Japanese.
SONY SNC-CH110 specifications
| Maximum frame rate | 30 fps (1280 × 720) |
|---|---|
| Effective picture elements (CH110) | Approx. 1,280,000 |
| Effective picture elements (CH210) | Approx. 3,270,000 |
| Minimum illumination (CH110) | 5.0 lx |
| Lens focal length (CH110) | 2.34 mm |
| Power consumption | 2.4 W |
| Operating temperature | 0°C~50°C |
| Dimensions | ø44 mm × 93 mm |
Source: Sony SNC-CH110 / SNC-CH210 Network Camera Installation Manual
All SONY SNC-CH110 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What type of network cable should be used for the SNC-CH110?
Use a shielded LAN cable, category‑5 (STP) for the SNC‑CH110.
From: Sony SNC-CH110 / SNC-CH210 Network Camera Installation Manual
How can the camera be reset to factory default settings?
Turn on the power while holding down the reset switch with a pointed object.
From: Sony SNC-CH110 / SNC-CH210 Network Camera Installation Manual
How do I set the IP address of the camcorder?
You can assign an IP address using the SNC Toolbox or by issuing an ARP command as described in the manual.
From: SONY SNC-CH110/CH210 SNC-DH210/DH210T net camcorder Manual
How can I disable Windows Firewall for the camcorder software?
The manual provides steps to configure Windows Firewall under the “配連 Windows Firewall” section.
From: SONY SNC-CH110/CH210 SNC-DH210/DH210T net camcorder Manual