Key facts
- Brand
- AXIS
- Model
- Q1602
- Industry
- Industrial
- Documents
- 3
- Languages
- EN
- Last added
- 2012-05-11
Start here
Axis Q1602 Network Camera User Manual
This manual is intended for administrators and users of the Axis Q1602 Network Camera. It covers hardware overview, network connection, camera settings, audio and video streams, and how to use the control button and status LEDs.
The guide also explains how to replace the lens, configure digital I/O, manage SD‑card storage, and perform firmware upgrades or factory resets. Troubleshooting tips and technical specifications are included at the end of the document.
AXIS Q1602 specifications
| Model Q1602 dimensions | 46 x 78 x 192 mm |
|---|---|
| Model Q1604 dimensions | 46 x 78 x 192 mm |
| Weight (both models) | 630 g |
| Battery type | 3.0 V CR2032 Lithium |
| Power source | Power over Ethernet (PoE) or external 2‑pin adapter |
| Network connector | RJ45 (PoE) |
All AXIS Q1602 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
How do I assign an IP address to the Axis Q1602/Q1604 camera?
If a DHCP server is not present, the camera defaults to 192.168.0.90; you can assign a static address using AXIS IP Utility or AXIS Camera Management.
When should I replace the battery in the Axis Q1602/Q1604 camera?
The internal 3.0 V CR2032 battery lasts about five years; replace it only when a low‑battery log message appears, using the same battery type.
How do I replace the lens on the Axis Q1602?
Disconnect the iris cable, unscrew the standard lens, then attach and screw on the new lens. Restart the product only if switching between P‑iris, DC‑Iris, or fixed/manual iris lenses.
How can I configure the Status LED?
Go to Setup → System Options → Ports & Devices → LED to set the LED behavior, such as unlit during normal operation or flashing for identification.