Key facts
- Brand
- AXIS
- Model
- P1347
- Industry
- Electronics
- Documents
- 3
- Languages
- EN
- Last added
- 2012-05-11
Start here
Axis P1347-E Network Camera User Manual
This manual provides administrators and users with instructions for installing, configuring, and managing the Axis P1347‑E network camera. It includes hardware overview, network setup, video and audio streaming, PTZ control, and troubleshooting guidance.
The document also details regulatory compliance, safety information, and support resources, and it references the Axis online help and firmware updates.
AXIS P1347 specifications
| Power over Ethernet (PoE) | Supported |
|---|---|
| Maximum load for 3.3 V DC Power pin | 50 mA |
| Maximum load for Digital Output pin | 100 mA |
| Maximum input voltage for Digital Input | +40 V DC |
| Audio input connector | 3.5 mm mono microphone or line‑in |
| SD card slot type | Standard or high‑capacity SD card (not included) |
All AXIS P1347 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
How do I reset the Axis P1347 to factory default settings?
Press and hold the control button for about one second until the status LED flashes green.
Which network cable should be used for outdoor installations?
A shielded (STP) Ethernet cable is required for outdoor or similar environments.
What type of battery does the Axis P13 series use?
The cameras use a 3.0 V CR2032 lithium battery to power the internal real‑time clock.
How can I assign an IP address to the camera?
You can let a DHCP server assign an address automatically, or set a static address using the AXIS IP Utility for single cameras or AXIS Camera Management for multiple cameras.