Key facts
- Brand
- DELL
- Model
- PowerEdge M820
- Category
- Servers Computer
- Documents
- 5
- Languages
- EN · ES · ZH
- Last added
- 2023-11-24
Start here

Dell PowerEdge M820 System Owner's Manual
This document serves as the owner's manual for the Dell PowerEdge M820 high-density server module. It covers system information, including front panel features and hard drive/SSD indicator patterns. The guide details how to use System Setup and Boot Manager to configure the system and manage startup devices.
The manual provides comprehensive instructions for installing and removing various components, such as high-density modules, hard drive/SSD units, intermediate I/O cards, processors, memory modules, and the motherboard. It also includes troubleshooting procedures for system memory, hard drives, USB devices, and processors, as well as instructions for running system diagnostics. This manual is written in Spanish.
Dell PowerEdge M820 specifications
| Processor type | Up to four Intel Xeon E5-4600 and E5-4600 v2 product family processor |
|---|---|
| Memory Architecture | 1600 MT/s, 1333 MT/s, 1066 MT/s, or 800 MT/s DDR3 and LV-DDR3 DIMMs |
| Memory module sockets | Forty-eight 240-pin |
| Minimum RAM | 4 GB (dual-processor configuration) |
| Maximum RAM | 3.0 TB (four-processor configuration) |
| RAID Controller type | PERC (H310, H710, and H710P) |
| Hard drives | Up to four 2.5-inch, hot-swappable SAS hard drives or two 2.5-inch, hot-swappable PCIe SSDs |
All Dell PowerEdge M820 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I enter System Setup?
Turn on or restart your system and press <F2> immediately after you see the message: <F2> = System Setup.
What are the supported boot modes?
The system supports BIOS boot mode and UEFI boot mode, which is an enhanced 64-bit boot interface.
What USB devices are supported by the high-density module?
The high-density module supports USB 2.0 devices from the Dell brand, such as USB floppy drives, USB flash memory drives, and USB DVD/CD drives.
How can you identify a hard drive error?
A hard drive error is indicated by the status light flashing amber four times per second.
How do I enter System Setup?
Turn on or restart the system, then press F2 immediately after the <F2> = System Setup message appears.
From: Dell PowerEdge M820 (for Dell PowerEdge VRTX chassis) User's Guide
What is the default boot mode?
The default boot mode is BIOS boot mode.
From: Dell PowerEdge M820 (for Dell PowerEdge VRTX chassis) User's Guide
