Key facts
- Brand
- DELL
- Model
- 500SC
- Category
- Servers Computer
- Documents
- 2
- Languages
- FR
- Last added
- 2023-11-29
Start here

Dell PowerEdge 500SC Server System User's Guide
This guide for the Dell PowerEdge 500SC describes the system overview, the front-panel features and indicators, the back-panel features, the supported operating systems and the power-protection devices. It also explains how to start and navigate the Dell OpenManage Server Assistant CD, how to configure the system, how to use the utility partition and the asset tag utility, and how to access and use the System Setup program, including the system password and setup password features.
The document then covers the system's I/O ports and connectors — serial, parallel, keyboard, mouse, video, USB and the integrated network interface controller — with pin numbers and signal assignments, and closes with technical specifications such as microprocessor, memory, drives, expansion slots, video, power supply, physical dimensions and environmental limits. A glossary and an "Obtention d'aide" (getting help) section are also listed. This manual is written in French.
Dell 500SC specifications
| Microprocessor | Intel Pentium III at 1 GHz or faster, or Intel Celeron at 800 MHz |
|---|---|
| Front-side bus speed | Pentium III: 133 MHz; Celeron: 100 MHz |
| Memory architecture | 72-bit PC-133 ECC SDRAM, four memory module sockets |
| Memory module capacities | 64, 128, 256 or 512 MB |
| Minimum / maximum RAM | 64 MB minimum, 2 GB maximum |
| Expansion slots | Two 64-bit 33/66 MHz slots and three 32-bit 33 MHz slots (PCI) |
| Drive bays | Three 1-inch internal IDE hard-drive bays, one 3.5-inch 1.44 MB floppy drive, one IDE CD-ROM drive |
| Video | ATI RAGE XL video controller with 4 MB video memory, 15-pin VGA connector |
| Power supply | 250 W or 330 W; 90–240 V, 47/63 Hz or 90–265 V, 47/63 Hz |
| Dimensions and weight | Height 43.7 cm, width 20.3 cm, depth 44.5 cm; 15.0 kg (33 lb) in maximum configuration |
| Operating temperature | 10 °C to 35 °C (storage: –40 °C to 65 °C) |
| USB connectors | Two 4-pin connectors compliant with the USB standard |
All Dell 500SC documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Which microprocessors does the PowerEdge 500SC support?
It supports an Intel Pentium III of at least 1 GHz with a 133 MHz external bus speed and 256 KB L2 cache, or an Intel Celeron at 800 MHz with a 100 MHz bus and 128 KB L2 cache.
What is the maximum amount of memory?
The system supports a minimum of 64 MB and a maximum of 2 GB of RAM, using 64, 128, 256 or 512 MB memory modules.
What is the purpose of the NVRAM jumper?
The NVRAM jumper determines if configuration settings are kept or cleared during the next system boot.
From: Dell PowerEdge 500SC Systems Installation and Troubleshooting Guide
What is the purpose of the PASSWORD jumper on the system board?
It activates or deactivates system password functions.
From: Dell PowerEdge 500SC Systems Installation and Troubleshooting Guide
