Key facts
Start here

Dell EqualLogic FS7610 Series Appliance Installation and Setup Guide
This guide explains how to install and set up the Dell EqualLogic FS7610 Series appliance, a NAS (network-attached storage) appliance in the Dell EqualLogic FS Series. It walks through pre-installation checks, rack installation, power and network cabling, NAS cluster configuration, and allocating NAS storage through NAS containers with CIFS shares and NFS exports. The document was published by Dell in October 2013 under part number YDNTN-KO A00 and is aimed at hardware administrators responsible for FS7610 hardware maintenance tasks.
The FS7610 consists of two 10Gb controllers with battery backup and two power supplies in a 2U chassis, and can be used with either SFP+ or 10GBASE-T controllers. Working with a PS Series group, it provides iSCSI block storage and NAS support from the same group; the NAS cluster network configuration uses a client network plus SAN and internal networks. This manual is written in Korean.
Dell FS7610 Series specifications
| Controller options | SFP+ or 10GBASE-T (not both in the same appliance) |
|---|---|
| Required PS Series firmware | 6.0 or later |
| 10GBASE-T model requirements | Firmware 7.0 and FluidFS 3.0 or later |
Source: Dell EqualLogic FS7610 Series Appliance Installation and Setup Guide
All Dell FS7610 Series documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
Can I use both SFP+ and 10GBASE-T controllers in the same FS7610 appliance?
No. The same appliance cannot use both SFP+ and 10GBASE-T controllers.
From: Dell EqualLogic FS7610 Series Appliance Installation and Setup Guide
What PS Series firmware version does the FS7610 require?
The FS7610 requires a PS Series group running firmware version 6.0 or later. The 10GBASE-T model requires firmware version 7.0 and FluidFS version 3.0 or later.
From: Dell EqualLogic FS7610 Series Appliance Installation and Setup Guide
Who is the intended audience for this manual?
The information is for hardware administrators assigned to EqualLogic FS7610 hardware maintenance tasks.
From: Dell EqualLogic FS7610 Series Appliance Hardware Owner's Manual
How many people are needed to install the hardware?
You need at least two people to install the hardware.
From: Dell EqualLogic FS7610 Series Appliances Installation and Setup Guide
What tools are required for rack installation?
A #2 Phillips screwdriver is required if installing the appliance in a rack.
From: Dell EqualLogic FS7610 Series Appliances Installation and Setup Guide
What indicates normal operation on the system health indicator?
The system status LED lights solid blue when the system power is on.
