Key facts
Start here

Dell PowerEdge 1955 Systems Configuration Guide
The Dell PowerEdge 1955 is a blade server system that can include up to ten server modules. Each module functions as an individual server with up to two microprocessors, two hard drives, and eight memory modules, all housed in an enclosure with shared power supplies, fan modules, and management resources.
This guide provides instructions for initial setup, including hardware installation, configuring drive mirroring (RAID 1), and setting up the Dell Remote Access Controller/Modular Chassis (DRAC/MC), KVM switch modules, and various network switch options.
Dell PowerEdge 1955 specifications
| Maximum Server Modules | 10 |
|---|---|
| Max Processors per Module | 2 |
| Max Hard Drives per Module | 2 |
| Max Memory Modules per Module | 8 |
All Dell PowerEdge 1955 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How do I configure drive mirroring (RAID 1) on the server module?
Press <Ctrl><C> during POST to start the Configuration Utility, select a controller, choose RAID Properties, and select Create IM Volume.
What is required to enable integrated mirroring?
Two drives must be installed in the server module to enable this feature.
How many server modules can the PowerEdge 1955 support?
Up to ten server modules (also known as "blades").
What is required to configure drive mirroring?
Two drives must be installed to enable integrated mirroring. Use the Configuration Utility to create an IM Volume.
