Key facts
- Brand
- DELL
- Model
- PC2716
- Category
- Network Switches
- Documents
- 2
- Languages
- EN
- Last added
- 2023-11-29
Start here

Dell PowerConnect 27xx Systems Getting Started Guide
This guide provides basic information to install and start running the Dell PowerConnect 27xx Series system, covering models PC2708, PC2716, PC2724, and PC2748. It describes site preparation, package contents, unpacking, and the three mounting options: flat surface, rack, and wall.
The guide also covers connecting the device to an AC power supply, booting the switch, and initial configuration through the web management interface, including setting the IP address, subnet mask, and default gateway.
Dell PC2716 specifications
| Models | PC2708, PC2716, PC2724, PC2748 |
|---|---|
| Rack size | 48.26-cm (19-inch) equipment rack |
| Power input | 100-240 VAC, 50-60 Hz |
| Operating temperature | 0 to 45ºC (32 to 113ºF) |
| Relative humidity | Up to 95 percent, non condensing |
| Flat surface clearance | 5.08 cm (2 inches) on each side and 12.7 cm (5 inches) at the back |
| Default IP address | 192.168.2.1 |
| Default subnet mask | 255.255.255.0 |
| Boot time | Approximately 90 seconds |
Source: Dell PowerConnect 27xx Systems Getting Started Guide
All Dell PC2716 documents by type
The shortest path to a working setup, usually only a few pages.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What mounting options are available for the Dell PowerConnect 27xx Series?
The devices can be installed on a flat surface, in a rack, or on a wall.
What is the default IP address of the PowerConnect switch?
The default IP address is 192.168.2.1 with a subnet mask of 255.255.255.0.
What items are included in the PowerConnect 27xx Series package?
The package contains the device/switch, an AC power cable, self-adhesive rubber pads, a mounting kit for rack or wall installation, a Documentation CD and a Product Information Guide.
From: Dell PowerConnect 27xx Series (PC2708, PC2716, PC2724, PC2748) Switch Getting Started Guide
How can the PowerConnect 27xx Series device be mounted?
It can be mounted in a standard 48.26-cm (19-inch) equipment rack, placed on a tabletop, or mounted on a wall.
From: Dell PowerConnect 27xx Series (PC2708, PC2716, PC2724, PC2748) Switch Getting Started Guide
